LumberJocks

All Replies on choosing scroll saw blades

  • Advertise with us
View BlasterStumps's profile

choosing scroll saw blades

by BlasterStumps
posted 08-21-2017 04:10 PM


7 replies so far

View MrUnix's profile (online now)

MrUnix

6949 posts in 2348 days


#1 posted 08-21-2017 06:10 PM

Do you have the manual for the saw? IIRC, many of those needed 6” blades, which are fairly uncommon (5” is more or less the standard). What blades you need (width, tpi, etc…) will be determined by what you are trying to cut.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Handtooler's profile

Handtooler

1626 posts in 2281 days


#2 posted 08-21-2017 07:07 PM

Sir, Check with Sheila Landry @sheilalandrydesigns.com. She’s a pro and shares her knowledge freely. Just a super LJ’er.

-- Russell Pitner Hixson, TN 37343 bassboy40@outlook.com

View BlasterStumps's profile

BlasterStumps

900 posts in 588 days


#3 posted 08-21-2017 08:38 PM



Do you have the manual for the saw? IIRC, many of those needed 6” blades, which are fairly uncommon (5” is more or less the standard). What blades you need (width, tpi, etc…) will be determined by what you are trying to cut.

Cheers,
Brad

- MrUnix


Yes, I think this one does need at least a 6” blade. I cut the ends off a coping saw blade and it works in it. I can access the instructions on one of their 15” saws online. It should be pretty much the same same for most things. I thought maybe I might buy a small pkg of blades with several different ‘sizes, teeth, style’ in it. Just don’t know much about those blades. I could and would cut coping saw blades to use in it if need be.

-- "I build for function first, looks second. Most times I never get around to looks." - Mike, western Colorado

View BlasterStumps's profile

BlasterStumps

900 posts in 588 days


#4 posted 08-21-2017 08:41 PM



Sir, Check with Sheila Landry @sheilalandrydesigns.com. She s a pro and shares her knowledge freely. Just a super LJ er.

- Handtooler


Thanks for the suggestion. I think I might have watched a few videos of hers if my memory serves me correctly. Thanks again.
Mike

-- "I build for function first, looks second. Most times I never get around to looks." - Mike, western Colorado

View Redoak49's profile

Redoak49

3532 posts in 2137 days


#5 posted 08-21-2017 09:54 PM

Every scrollers has their own favorite blades. For me, in general there are three blade types…plain skip tooth, reverse and ultra reverse. You should try all three types to understand how they cut and feel. In general, the thicker the material, the higher number blade you will use.

I do Intarsia and thicker puzzles. So I am typically cutting 3/4” material and use a #5 or #7 skip tooth blade. You have to figure out what works for you and your saw.

Also, the blades get dull and you should change them when you have to push harder.

Trial and error and experience.

View Jim Finn's profile

Jim Finn

2682 posts in 3071 days


#6 posted 08-22-2017 01:42 AM

The photo you posted looks like there is a spring at the top to return the blade upward after each stroke. This is a very old design from back when they were called “Jig Saws”. I last used one in the middle 50’s. I seem to remember the blades were much heftier than modern ones are. I buy all my scroll saw blades on line but they are plain end 5” blades. Not sure they will work on your saw.

-- No PHD just a DD214 Website> craftingcouple.com

View BlasterStumps's profile

BlasterStumps

900 posts in 588 days


#7 posted 08-22-2017 10:44 PM

Hi Jim, I think this saw takes a 6” blade. If I have to, I can modify coping blades. That is what I have in it now. I really enjoy using the old saw. It is just plain fun. I’m trying to talk my wife into giving it a go. If I can get some skip tooth or spiral blades, it should make it real fun to cut things out with. I haven’t used a scroll/jig saw much so it is something new for me.
Mike


The photo you posted looks like there is a spring at the top to return the blade upward after each stroke. This is a very old design from back when they were called “Jig Saws”. I last used one in the middle 50 s. I seem to remember the blades were much heftier than modern ones are. I buy all my scroll saw blades on line but they are plain end 5” blades. Not sure they will work on your saw.

- Jim Finn


-- "I build for function first, looks second. Most times I never get around to looks." - Mike, western Colorado

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com