LumberJocks

All Replies on How to secure live edge slab to a steel base?

  • Advertise with us
View ModernWoodWorkz's profile

How to secure live edge slab to a steel base?

by ModernWoodWorkz
posted 08-13-2017 11:43 PM


4 replies so far

View runswithscissors's profile

runswithscissors

2804 posts in 2107 days


#1 posted 08-14-2017 04:01 AM

I glued up a “slab” for a coffee table because I didn’t have wide enough boards. This was from a beech I’d taken down several years before. I made up legs with stretchers from 1 1/2” pipe. Instead of using pipe flanges (which seemed too big for the scale of the table) I welded square plates to the tops of the legs. When I first screwed them in place, a crack started forming very soon. So I filed the screw holes into an oblong shape and refastened, leaving the screws just snug enough to prevent wiggling, but not so tight as to prevent wood movement. The incipient crack then went away, and it has worked fine since.

The slab is not reinforced with an apron. This doesn’t seem to be a problem

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View jerryminer's profile

jerryminer

937 posts in 1523 days


#2 posted 08-14-2017 04:39 AM

Screws in slotted holes is my go-to solution.

-- Jerry, making sawdust professionally since 1976

View Loren's profile

Loren

10477 posts in 3729 days


#3 posted 08-14-2017 04:51 AM

The easiest approach imo is to attach two
battens with slotted screw holes to the
bottom of the slab. Then the batten ends
can be fastened to the base. The method
avoids making slotted screw holes in steel.

View William Shelley's profile

William Shelley

576 posts in 1551 days


#4 posted 08-14-2017 11:31 PM

Use a 3/4” NPT tap to tap a blind hole directly into the slab, if it’s thick enough. Assuming your ‘steel base’ is iron plumbing pipe.

-- Woodworking from an engineer's perspective

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com