LumberJocks

All Replies on saw blade

  • Advertise with us
View buckbuster31's profile

saw blade

by buckbuster31
posted 08-11-2017 04:00 PM


6 replies so far

View MrRon's profile

MrRon

4916 posts in 3323 days


#1 posted 08-11-2017 04:33 PM

Forrest WWII for sure.

View Fred Hargis's profile

Fred Hargis

5032 posts in 2573 days


#2 posted 08-11-2017 04:46 PM

If I had to use just one, it would be a 30 tooth combo blade. Probably a WW2, but I’m not convinced there aren’t other brands that would be just as good. This blade would not do well cross grain on plywood, but it would making rip cuts in 1”+ hardwoods a lot easier.

-- Our village hasn't lost it's idiot, he was elected to congress.

View knotscott's profile

knotscott

8099 posts in 3455 days


#3 posted 08-11-2017 04:54 PM

If it had to be one – Like Fred, I’d probably go with the 30T WWII for its versatility in thicker ripping, but it really depends on your saw and what you do. The Infinity Combomax is a solid easy to use all around performer at ~ $70 too, but the Infinity Super General would be better for finer crosscuts and ply than either. I tried…best I could do was 3 blades!

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View WhyMe's profile

WhyMe

1034 posts in 1640 days


#4 posted 08-11-2017 05:51 PM

I hear the Ridge Carbide blades are really good. But, $$$$.

http://ridgecarbidetool.com/saw-blades/ridge-super-blades/table-saw-blades.html

View AlaskaGuy's profile

AlaskaGuy

4264 posts in 2388 days


#5 posted 08-11-2017 07:10 PM

If I had to use one blade I’d probably just quit woodworking. There nothing worse that looking at a finished project and seeing chip out on the cuts. I don’t believe they is one blade that can do it all with some chip out some where.

-- Alaskan's for Global warming!

View knotscott's profile

knotscott

8099 posts in 3455 days


#6 posted 08-11-2017 07:36 PM



I hear the Ridge Carbide blades are really good. But, $$$$.

http://ridgecarbidetool.com/saw-blades/ridge-super-blades/table-saw-blades.html

- WhyMe

The TS2000 is extremely competitive with the 40T WWII, and can often be had for ~ $95. Not an inexpensive blade by any means, but is less than the Forrest.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com