LumberJocks

All Replies on Bending/Drying green "switches" to hold their shape

  • Advertise with us
View Glorfindel's profile

Bending/Drying green "switches" to hold their shape

by Glorfindel
posted 08-09-2017 07:38 PM


6 replies so far

View Loren's profile (online now)

Loren

9931 posts in 3550 days


#1 posted 08-09-2017 08:06 PM

Wood dries best at low temperatures
I think. Your kiln may not go that
low. All you want to do is evaporate
the water in the wood. I’ve dried wood
in a toaster over to shrink it at around
140 degrees I think. You can also build
a “shop oven” by insulating a box with
foil and putting a light bulb in there to
generate heat.

View Glorfindel's profile

Glorfindel

4 posts in 192 days


#2 posted 08-09-2017 08:30 PM

Thanks,
My kiln can hold at that low of a temperature. I’m going to try 140 F for 48 hours and see how they feel. Any idea of how long I should keep them in? Again, they’re roughly the size of hot dog roasting sticks, but bent into curved shapes.
Thanks for your time,
Matt

View Loren's profile (online now)

Loren

9931 posts in 3550 days


#3 posted 08-09-2017 08:35 PM

The only way to be sure is to use a
moisture meter. 48 hours sounds
like a good starting point.

View Glorfindel's profile

Glorfindel

4 posts in 192 days


#4 posted 08-09-2017 08:44 PM

Thanks,
Any idea who might have a moisture meter on hand? I have a local kiln dried lumber place, maybe I’ll ask them.
Thanks very much for your input,
Matt

View Loren's profile (online now)

Loren

9931 posts in 3550 days


#5 posted 08-09-2017 08:56 PM

View Glorfindel's profile

Glorfindel

4 posts in 192 days


#6 posted 08-10-2017 04:06 AM

Thanks for the link, I appreciate it! – Matt

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com