LumberJocks

All Replies on Dust collection fiber barrels

  • Advertise with us
View JamesG2222's profile

Dust collection fiber barrels

by JamesG2222
posted 08-08-2017 05:46 PM


4 replies so far

View johnstoneb's profile

johnstoneb

3014 posts in 2321 days


#1 posted 08-08-2017 05:56 PM

The more height the better. You need it for capacity.

-- Bruce, Boise, ID

View Fred Hargis's profile

Fred Hargis

5097 posts in 2642 days


#2 posted 08-08-2017 08:13 PM

I’ve never cut a fiber barrel but have done a few wooden ones as well as metal ones…...I’ve never been able to cut it straight. But I don’t think that’s the only problem, you need to get the metal ring put back onto to for stiffness. Still, if the 55 gallon drums are free, it doesn’t cost anything to try.

-- Our village hasn't lost it's idiot, he was elected to congress.

View tomsteve's profile

tomsteve

832 posts in 1368 days


#3 posted 08-08-2017 09:36 PM

keeping a straight edge is simple.
ive cut plastic, fiber, and metal drums by using my circ saw and using the floor as my guide.metal cutting blade for the metal drum. cuts about 1 1/2” up.
made a gage once when i was stacking 2 plastic drums for my DC- a piece of wood cut to length where i wanted the cut, taped a marker on one end and nailed a little leg on the other that rode on top of the drum. ran it around the drum to mark where i wanted the cut then used my circ saw with a plywood blade.worked like a charm both ways.
fiber drums got a little flimsy, so i just took a piece of the cutoff and glued it around the top- instant garbage can.

View JamesG2222's profile

JamesG2222

2 posts in 1634 days


#4 posted 08-09-2017 02:24 AM

Thanks,

This is a great site to get help

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com