LumberJocks

All Replies on Home Depot - plywood and insulation

  • Advertise with us
View HokieMojo's profile

Home Depot - plywood and insulation

by HokieMojo
posted 1607 days ago


16 replies so far

View TheDane's profile

TheDane

3722 posts in 2289 days


#1 posted 1607 days ago

I was at the local Home Depot this morning and noticed the US-made plywood. The 3/4” oak at under $40 a sheet looks like a decent deal. Just wish they carried Baltic Birch!

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View Alexander's profile

Alexander

190 posts in 1737 days


#2 posted 1607 days ago

thanks for the heads up

-- John at Sugarloft Mountain........Don't argue with an idiot; people watching may not be able to tell the difference.

View HokieMojo's profile

HokieMojo

2098 posts in 2354 days


#3 posted 1607 days ago

i should add, all sheets had five plys plus two veneers.

View MrHudon's profile

MrHudon

114 posts in 1836 days


#4 posted 1607 days ago

Is it flat ? I haven’t seen a flat sheet of plywood at HD in years.

-- Mark, www.mrhudon.com

View HokieMojo's profile

HokieMojo

2098 posts in 2354 days


#5 posted 1607 days ago

it looked perfectly fine to me, but I think the true test would be when you pick it up and store it outside of the stack. I didn’t buy any because I’ve got what I need right now, but I just thought I’d let others know.

View TheDane's profile

TheDane

3722 posts in 2289 days


#6 posted 1607 days ago

The 3/4” looked pretty flat … didn’t notice any curling or lamination problems.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View Ingjr's profile

Ingjr

138 posts in 1642 days


#7 posted 1607 days ago

HD caught a LOT of flack for that Chinese crap they were selling for a long time. Your right about the new US stuff though, it is excellent and reasonably priced. I believe HD made the move to American stuff in all their stores a couple months ago.

-- The older I get the faster I was.

View UnionLabel's profile

UnionLabel

660 posts in 1826 days


#8 posted 1607 days ago

Yea, I think they sent it all down here in the Chicago area. Was just at HD this afternoon, looked like a rolling savanna in the plywood rack. Ended up at Menard’s. Plywood better and cheaper there.

They have to start doing better. Around here, Aetna plywood can beat them silly with price and quality.

-- Methods are many,Principles are few.Methods change often,Principles never do.

View Steven H's profile

Steven H

1113 posts in 1686 days


#9 posted 1607 days ago

Is Lowes wood the same like Home Depot? I don’t pay attention in their wood.

View dan abalos's profile

dan abalos

106 posts in 1609 days


#10 posted 1607 days ago

Hey all
I picked up a sheet of oak plywood at HD about a month ago and it looks pretty good to me. I have it stored in my shop on its end and plan to make a small cd cabinet for someone. I will admit that a lot of the times I do go to HD the wood does look the rolling hills and I have to go elsewhere or wait for a new shipment. Hell it is HD afterall what do we really expect, right?
Dan

-- Beer is the reason I exist on this earth, that and my family! (Aurora, IL) my blog: http://justanaveragedad.wordpress.com/

View SnowyRiver's profile

SnowyRiver

51451 posts in 2106 days


#11 posted 1607 days ago

My biggest problem with HD and Lowes is that it seems like the veneer is much thinner than ply that you might buy at a hardwood lumber company. I built a couple of oak pieces some years ago using HD ply and the veneer was wafer thin vs what I have seen at non discount lumberyards. If you need or want to do any sanding you really have to be careful with HD ply.

-- Wayne - Plymouth MN

View 459fitter's profile

459fitter

30 posts in 1691 days


#12 posted 1605 days ago

I would definitely agree with the ply’s being of a lesser quality.My local HD and Lowes has very seldomly had a decent piece of wood. I think they get a big discount for buying air dried wood instead of quality kiln dried wood. I bought a few pressure treated posts last summer which were so wet inside that my saw blades would steam up after cutting them to length. Not to mention the fact that as soon as the concrete cured for the posts the twisted up and split like no tomorrow. I had one that almost twisted 45 degrees, not so good for a fence! As far as the insulation goes, it might have something to do with the enforcement of the new (2009) IECC (international Energy Conservation Code) code. Many states are following these new standards for new buildings and homes. One of the new standards requires that basement walls be insulated with R-19 batts or R-15 continuous sheets. Above grade walls are now R-30 batts and R-25 continuous sheets. So the demand for R-13 rolls just went down hill fast. I am not absolutely positive on the R-values, but you can check with your local building department to find out their requirements.

-- Andy ---- Missoula, MT

View HokieMojo's profile

HokieMojo

2098 posts in 2354 days


#13 posted 1605 days ago

That’s interesting Andy, particularly on the R-Value. I guess from my perspective, I’ve got 2×4 studs so it makes me the unintended beneficiary of the supply demand curve.

View Bobby's profile

Bobby

78 posts in 1678 days


#14 posted 1605 days ago

I really needed a piece of birch a few weeks ago. I called my usual wood supplier only to find out that he was in Florida and wouldn’t be back until the 15th. But I really NEEDED the birtch so it was off to HD. Almost fell on my butt when I saw they were asking $35.00 a board. I was stuck so I started looking at it… I took about 7 pieces off the rack before I found one that wasn’t warped or cupped. $35.00… plus tax. I was so glad when my guy finally got back. I went to see him and got $50.00 worth of rough birtch… 4 times more than what I got for $35.00. I built my new basement steps a couple of years ago and bought all my wood from my guy… the total bill for the oak lumber was $200.00. Imagine what it would have cost if I bought the wood from HD… or any other outlet? I shutter to think about it.

—Bobby

View RedShirt013's profile

RedShirt013

219 posts in 2288 days


#15 posted 1605 days ago

The HD in my area carries plywood by Columbia also, but they still don’t look too good to me. I don’t have the strength to lift and check every piece, they seem flat enough but the veneer is very thin, and I still see some voids. You have it far cheaper, here 3/4” Maple ply at HD is $60+ CDN

That’s not mentioning the sheathing grade plywood, by Columbia also, which are simply terrible. Warped and delamination everywhere. Whatever the company is, Home Depot will squeeze every last drop of profit out of them and inevitably quality will suffer.

-- Ed

View Bryan_M's profile

Bryan_M

45 posts in 1669 days


#16 posted 1604 days ago

My local Home Depot just has expensive crap for plywood. Its all very ugly and warped. Also smells like butt. Luckily I have a nice lumber place not too far away to get the good stuff.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase