LumberJocks

All Replies on Protecting my jigs

  • Advertise with us
View christherookie's profile

Protecting my jigs

by christherookie
posted 02-07-2017 04:05 PM


6 replies so far

View Ripper70's profile

Ripper70

774 posts in 811 days


#1 posted 02-07-2017 04:16 PM

Johnson’s paste wax is my go to. Keeps everything nice and slick and offers a decent amount of protection. I have a birch ply table extension that’s covered in the stuff and it’s holding up just fine. Maybe spray some shellac on it if you’re concerned that the paste wax isn’t enough but I think it’ll be fine with the wax alone.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View pintodeluxe's profile

pintodeluxe

5565 posts in 2716 days


#2 posted 02-07-2017 04:36 PM

Wipe some clear shellac on them. A couple coats and you will be protected for the life of the jigs.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View OggieOglethorpe's profile

OggieOglethorpe

1276 posts in 2013 days


#3 posted 02-07-2017 04:43 PM

I don’t put anything on my jigs unless a part needs protection from glue or help sliding. For glue protection, I prefer shellac, for slide lubrication, paste wax or a wax substitute like Slip-it or Topcote.

My jigs are usually built on the fly, when needed, from MDF or birch ply, both very stable materials. I prefer nothing on places like sled floors and fences, as the raw surface provides a bit of traction to help keep the material in place during use.

Add a little dust to a smooth and shiny surface and you’ve got a nice bar bowling machine surface, but a terrible surface for a tapering or crosscut sled. ;^)

View Rick  Dennington's profile

Rick Dennington

5689 posts in 3097 days


#4 posted 02-07-2017 04:49 PM

On all my jigs and fixtures, plus all my shop furniture, I use tung oil….A 4 to 1 ratio, and usually 2 coats will do….One part tung oil to 4 parts mineral spirits…..It’s just personal preference as to how you want to do it…..

-- " Don't pet the sweaty things, and don't sweat the petty things."

View DirtyMike's profile

DirtyMike

637 posts in 804 days


#5 posted 02-07-2017 05:00 PM

I just trust my jigs use their best judgment when that special time comes.

View OSU55's profile

OSU55

1513 posts in 1892 days


#6 posted 02-07-2017 05:01 PM

IMO all jigs need protection from absorbing liquids – you never know when liquid of some kind, spilled drink, dropped bucket, overspray from something, etc., and paste wax will wear away. All of mine get a coat or 2 of shellac, waxed or dewaxed. Many time liquid of some sort found its way onto a jig, and i was able to just wipe it off. If you think wax on bare wood is slick, try wax on shellac lightly sanded with 600. Its too cheap and easy to wipe, brush, or spray it on, and dries very quickly.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com