LumberJocks

All Replies on Teak Plywood

  • Advertise with us
View ric53's profile

Teak Plywood

by ric53
posted 02-05-2017 12:48 PM


12 replies so far

View TungOil's profile

TungOil

996 posts in 581 days


#1 posted 02-05-2017 01:38 PM

Teak is getting harder to come by, even plywood will cost quite a bit (I’d expect to pay at least $250’for a sheet of 3/4” even at wholesale prices). If you usual plywood distributor can’t get it for you check with the ones that cater to boat building.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

View Kazooman's profile

Kazooman

1090 posts in 2038 days


#2 posted 02-05-2017 03:41 PM

TungOil is spot on. It’s not near you, but I checked the prices at my go-to wood supplier, Johnson Lumber in Charlotte, Michigan. The only teak plywood they list is marine grade and a 3/4” 4’ x 8’ sheet is $188.

View Loren's profile

Loren

10477 posts in 3734 days


#3 posted 02-05-2017 05:30 PM

Some clients have great enthusiasm for teak
until they hear the price of it.

I suggest working up a double quote in teak
ply and in solid walnut.

View William Shelley's profile

William Shelley

576 posts in 1555 days


#4 posted 02-05-2017 06:18 PM

Teak is great for boats. For everything else, there’s other woods and stain :)

-- Woodworking from an engineer's perspective

View wuddoc's profile

wuddoc

298 posts in 3804 days


#5 posted 02-06-2017 01:59 AM

Here is my former Teak veneered dining room table with leaves extended. Veneer was 4’ x 8’ PSA to eliminate the need for clamping. The core was birch plywood with solid teak edging. Teak stain from Mohawk Finishes was used on all items, then sprayed with Mohawk sealer and flat lacquer topcoat.

-- Wuddoc

View shipwright's profile

shipwright

8031 posts in 2884 days


#6 posted 02-06-2017 04:01 AM

Most of that “Danish Modern” furniture was Teak plywood in the first place so it would only be appropriate to use it to make matching pieces.
Yes it is expensive but it is the client who is paying for it. Just be aware that because of the expense of the material teak plywood often has even thinner veneer than other ultra thin veneered cabinet grade plywoods. I’ve used lots of it and I always ( for use in boats) put epoxy sealer on it before I even started to cut it.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View shipwright's profile

shipwright

8031 posts in 2884 days


#7 posted 02-06-2017 04:03 AM

.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View jbay's profile

jbay

2494 posts in 985 days


#8 posted 02-06-2017 04:16 AM

Ric,
Check out these guys. I’ve dealt with them a few times. They have good products.
http://iaplywood.com
Another option (other than plywood) would be to buy the leaves and lay them up separately.

View Lazyman's profile

Lazyman

2288 posts in 1473 days


#9 posted 02-06-2017 05:02 AM

Thinking outside the box…You might be able to repurpose another piece of mid century or even modern Danish furniture to make a desk so check Craig’s list for something that has large enough pieces to salvage. We’ve got some teak Danish book shelves for example that we’ve had for about 25 years. Another source for repurposed lumber are teak patio tables though I’m not sure if they are exactly the same kind of teak? If you have a band saw, you could also resaw your own veneer from teak lumber.

Just a thought.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View rlfrost's profile

rlfrost

2 posts in 3501 days


#10 posted 01-12-2018 04:27 PM

I don’t know if anyone is still reading this, but I am now in need of some teak plywood if any exists, but I can’t find a supplier. Any help would be very nice.

RL

View Kazooman's profile

Kazooman

1090 posts in 2038 days


#11 posted 01-12-2018 04:58 PM

Check my post above. They still list teak plywood.

View Jack Lewis's profile

Jack Lewis

309 posts in 1164 days


#12 posted 01-12-2018 05:32 PM



I don t know if anyone is still reading this, but I am now in need of some teak plywood if any exists, but I can t find a supplier. Any help would be very nice.

RL

- rlfrost


In 2017 a member posted this above.
“TungOil is spot on. It’s not near you, but I checked the prices at my go-to wood supplier, Johnson Lumber in Charlotte, Michigan. The only teak plywood they list is marine grade and a 3/4” 4’ x 8’ sheet is $188.”

Just trying to help TungOil!

-- "PLUMBER'S BUTT! Get over it, everybody has one"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com