LumberJocks

All Replies on Wine stopper and the finish you put on?

  • Advertise with us
View Biggamefish's profile

Wine stopper and the finish you put on?

by Biggamefish
posted 01-19-2017 01:15 PM


2 replies so far

View Lazyman's profile

Lazyman

2288 posts in 1474 days


#1 posted 01-19-2017 04:47 PM

Are you talking about Deft spray lacquer? I don’t think that you need to friction finish it, though you could polish it with 800 grit sandpaper on the lathe after it dries I suppose. You can also spray it on while it turns. Another option is to use a CA finish. You can get an unbelievably nice finish in just a few minutes with it. I used this on the beer mug project I posted last year and it turned out really well. I bought a “trial kit” that includes the CA, activator, polish and mesh sandpaper on Amazon for about $30 and it worked great. It was enough CA finish to complete 3 bear mugs and a few small bowls.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View them700project's profile

them700project

115 posts in 1105 days


#2 posted 01-19-2017 06:42 PM

i have only done a few but CA works wells far for me as long as they are all outside curves.
maybe practice this on a random piece

-sand out to 400 finish with machine off with the grain
-with stopper on lathe LOW speed put a couple drops of thin ca on clean shop towel. rub on quickly and quickly move towel off stopper.
-hit with activator
-do this 6 times total 3 thin followed by 3 medium coats
-once hardened start sanding with 400 abranet
-wet sand out to however fine you want.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com