All Replies on Anyone make DIY router setup bars?

  • Advertise with us
View thomasfurman's profile

Anyone make DIY router setup bars?

by thomasfurman
posted 01-18-2017 02:58 AM

8 replies so far

View waho6o9's profile


8539 posts in 2818 days

#1 posted 01-18-2017 03:10 AM

View bigJohninvegas's profile


545 posts in 1703 days

#2 posted 01-18-2017 03:26 AM

I use the to lee valley, veritas set. It is just a couple dollars less than the kreg set, and comes with a 1×2x3 block.
I have cut wood strips or blocks to do a specific, repetitive set up. But have not saved them, or made a whole set of them.

-- John

View ksSlim's profile


1290 posts in 3131 days

#3 posted 01-18-2017 03:36 AM

I use Ace hardware key stock. And shim stock for thin corrections.

-- Sawdust and shavings are therapeutic

View gailmo's profile


28 posts in 1279 days

#4 posted 01-18-2017 03:57 AM

I also use Ace Hardware’s key stock. They are cheap and come in a variety of sizes.

View WoodES's profile


135 posts in 1932 days

#5 posted 01-18-2017 04:35 AM

I have an old set of brass setup gauges, (brass is too soft to damage the bits), but now primarily use this for most vertical depth and horizontal distance settings.

View Madmark2's profile


409 posts in 829 days

#6 posted 01-18-2017 04:54 AM

Digital height gauge is $40 or so and perfect for duplicating setups on both the router and tablesaw. Easy to read for us with old eyes too.


View HokieKen's profile


7627 posts in 1379 days

#7 posted 01-18-2017 12:09 PM

I got this digital height gauge for Christmas for setting jointer knives. Turns out to be the bee’s knees for setting router bit heights too.

-- Kenny, SW VA, Go Hokies!!!

View Fred Hargis's profile

Fred Hargis

5242 posts in 2734 days

#8 posted 01-18-2017 12:24 PM

Yes I did. I bought brass bar stock in the needed sizes and cut some 2” long blocks as well as some that are 12” long. I even had some stock left over that’s about 30” long and find that handy on occasion. I bought the bar stock from Metals Online. I’ve also used key stock and it works well. Also, check hobby shops. They usually have a little metal stock display that has some 1” wide, 1/16” thick (and thinner) stock that is useful.

-- Our village hasn't lost it's idiot, he was elected to congress.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics