LumberJocks

All Replies on What Size Clamps to Buy?

  • Advertise with us
View cFurnitureGuy's profile

What Size Clamps to Buy?

by cFurnitureGuy
posted 1615 days ago


21 replies so far

View PurpLev's profile

PurpLev

8476 posts in 2250 days


#1 posted 1615 days ago

I would say that it really depends on the work you do. if you do boxes – than 6” might be ideal, if you do furniture (as your user id suggest) it depends on what size furniture you make most. do you do lots of panels? what sizes? do you do mostly carcass construction? what sizes?

I find that I mostly use 6” for smaller parts, and 18”/24” for everything else. I find the 18”/24” most flexible as they are short enough to be light weight to handle, but still have a good reach for carcass construction most of the time. the 18” is a bit too short at times. the 24” mostly fits the bill.

-- ㊍ When in doubt - There is no doubt - Go the safer route.

View Jeison's profile

Jeison

947 posts in 1709 days


#2 posted 1615 days ago

It really really depends on what kind of projects you’re working on, personally I find I get the most use out of 6” and 12” one handed bar and F-stlye clamps, and 2” and 4” C-clamps. I stock up on Irwins when Menards has the occasional sale, also the Pittsburgh brand from Harbor Freight is a good quality and inexpensive (esp when they’re on sale, tho I try to stay away from the HF Central Forge clamps – yes they’re cheap in price, but they’re cheap in construction too)

Unless you find a great sale, anything over 24” I’d say pick up some HF pipe clamps, thats probably the most economical.

-- - Jei, Rockford IL - When in doubt, spray it with WD-40 and wrap it with duct tape. The details will attend to themselves.

View cFurnitureGuy's profile

cFurnitureGuy

145 posts in 1777 days


#3 posted 1615 days ago

thanks guys! i guess i left out what size projects i usually work on… i am kind all over the place as far a size! Everything form bookcases, desks to cabinets and smaller box type cabinets! i have been reading about the HF clamps and sounds like they are a good deal and an economical choice… the Bessey F style clamps at Lowes seem to be reasonable as well..

-- Justin, Savannah,Ga

View Kent Shepherd's profile

Kent Shepherd

2697 posts in 1887 days


#4 posted 1615 days ago

If you use pipe clamp fixtures, you can buy multiple lengths of pipe, and switch out the fixtures on the pipe as needed. I even keep a couple of ten foot pipes to use when I need them. That way you don’t have to have near as many clamps. You can always ad fixtues as you can afford them.

-- She thought I hung the moon--now she just thinks I did it wrong

View dbhost's profile

dbhost

5378 posts in 1833 days


#5 posted 1615 days ago

Depends on what you are doing. BUT… For the most part, I seem to use my 6” and 12” bar clamps, and my strap clamps the most. Every now and then I use my 24” and 36” not to mention the pipe clamps, but it is infrequent…

Watch Harbor Freight for sales on their F bar clamps… I know a lot of their stuff is junk but the clamps I list below are widely considered “HF Gems”...

You will want item #s…

#96210 6” Bar Clamp. I paid $1.99 each for mine. #96214 12” Bar Clamp. I paid $2.99 each for mine. #96211 18” Bar Clamp. I don’t have any 18”, but they go for $3.99 on sale… #96213 24” Bar Clamp. I paid $4.99 each for mine. #96487 36” Bar Clamp. I paid $5.99 each for mine.

On top of the bar clamps I also got…

#45975 18 Piece PVC Spring Clamp Set. I think I paid $8.99 for the set.

DO NOT buy any of the clamps that are the Ratcheting Bar Clamps. Those things are utter junk and not worth the gas to go get them…

Not HF related…

I have picked up a couple of the BigHorn 19632 strap clamps. Cheapies yeah, fiber reinforced PVC construction yeah, but GREAT for the dollars they sell for. IF I were willing to spend more, I would go with the Bessey Vario clamps instead…

-- My workshop blog can be found at http://daves-workshop.blogspot.com

View Swede's profile

Swede

191 posts in 1620 days


#6 posted 1615 days ago

I have several Jorgesen Handscrew clamps of various sizes they are nice being made of wood they don’t dent my clamping projects. I also have some of there Bar Clamps. I also agree that you can’t beat pipe clamps for the price and being able to use different length of pipes.

-- Swede -- time to make some sawdust

View Sawkerf's profile

Sawkerf

1730 posts in 1670 days


#7 posted 1615 days ago

I build cabinets and furniture and have several of the Pony pipe clamps (in 1/2” & 3/4”). Most of my pipes are galvanized and were salvaged from house repipe jobs. I keep a few threaded couplings around to make up really long clamps when needed.

I also have eight of the 12” Irwin “Quickgrip” clamps and two of their 24” clamps.

Then, there are the 6” and 3” spring clamps, as well as the four strap clamps.

There may still be some “C” clamps around, but I’m not sure where I put them. – lol

-- Adversity doesn't build character...................it reveals it.

View Blair Helgason's profile

Blair Helgason

169 posts in 2015 days


#8 posted 1615 days ago

I just recently bought four 24” Jorgensen Cabinet Master clamps from Lee Valley. They are insanely expensive but worth every penny. When I use then they feel more like a bench vise rather than clamps. They’re so solid and force every piece square. After tax these were almost $200 which was hard but I’m pretty sure I’ll have them forever.

http://www.leevalley.com/wood/page.aspx?c=1&p=49425&cat=1,43838

-- Blair

View RKW's profile

RKW

326 posts in 2048 days


#9 posted 1615 days ago

Hey Justin, check out the blog i did on pipe clamps a while back. Between what i wrote and everyone’s comments, I think it might help.

-- RKWoods

View richgreer's profile

richgreer

4522 posts in 1676 days


#10 posted 1615 days ago

I have clamps in all sizes and styles. The clamps I use the most are the little 6 inch one-hander clamps (Irwin). I’m also a big fan of the old fashion wooden hand screw clamps. I probably like them because, if I need to, I can modify them. Need an extra deep throat – no problem – make new, longer 2×2s of maple and move the mechanics to your new maple.

-- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.

View SnowyRiver's profile

SnowyRiver

51451 posts in 2081 days


#11 posted 1615 days ago

I have quite a few Jorgensen ISD clamps. I was doing the same thing, buying one hear and there. I now have 4 each – 12 inch, 18 inch, 24 inch, and 36 inch. I love them. I use them not only clamping joints, but they work great holding wood down while routing etc on the workbench. I think the 12 and 18 inch ones I use the most. I am working on buying the Bessey Revo cabinet clamps now, but thats going to take a while to build up the stash :-) I also have Jorgensen pipe clamps among others but the ISD ones I use the most.

-- Wayne - Plymouth MN

View a1Jim's profile

a1Jim

112000 posts in 2178 days


#12 posted 1615 days ago

I agree with kent.

-- http://artisticwoodstudio.com Custom furniture

View cFurnitureGuy's profile

cFurnitureGuy

145 posts in 1777 days


#13 posted 1614 days ago

thanks everyone for the feedback! i have several pipe clamps that i use from time to time… i also have 3-4 jorgs clamps which i like! but i will look into HF clamps as well. they just built a HF store here about a year ago… yay (good for me! bad for my back account!) next on the list will be a clamp rack to display my “trophies” ;)

-- Justin, Savannah,Ga

View Sarit's profile

Sarit

466 posts in 1741 days


#14 posted 1614 days ago

I started w/ the pipe clamps too, but now i’m using lots of HF aluminum bar clamps. When I total the price of the black pipe and the clamp, i can get 2 HF alum bar clamps of the same length for the same price. You gotta clean or cover the black pipes so they don’t leave black marks on the wood. Plus they are heavy, especially when you are using 4 or more at a time. If you use galv pipe instead then they slip. Just a pain in my opinion.

View ackychris's profile

ackychris

103 posts in 1614 days


#15 posted 1597 days ago

I was just clamp shopping on the harbor freight site, and I came across this thread. Everyone’s got it covered, pretty much, but I thought I’d mention that lately, rockler.com’s handscrew clamps have been on sale frequently. I got 3 10” Rockler handscrews for under $10 each—great deal, IMO.

-- I hate finishing. I never manage to quit while I'm ahead. --Chris

View DustyB's profile

DustyB

4 posts in 1954 days


#16 posted 1595 days ago

For those in the Midwest, Menard’s has Jorgensen parallel bar (they don’t list them as the “cabinet masters” but base on the picture they look just like them) clamps on sale- $19.99 for 24”, $24.99 for 36” and $29.99 for 48”. Also have 1/2” and 3/4” pipe clamps for $6.99/ $8.99. Seems like a pretty good deal. I will be picking up a couple of each.

http://www.menards.com/

View cFurnitureGuy's profile

cFurnitureGuy

145 posts in 1777 days


#17 posted 1595 days ago

i stopped by HF on friday and picked up some clamps that were on sale… i think i bought 2- 6”, 2- 12”, 2- 18” and 2- 24” for around 30 dolllars…. they arent top of the line or heavy duty but cant beat it for the price!
thanks all for you input and feedback!!

-- Justin, Savannah,Ga

View LittlePaw's profile

LittlePaw

1571 posts in 1679 days


#18 posted 1593 days ago

All of the above! I don’t think there is one correct answer to your question. As for me, everytime I see a clamp (of any kind/size) I try to picture where/how/when I could use it. Ad if there is a fair possibility that I would use it, I’d buy it. I’ve found about 30+ clamps of all sizes at garage sales – and cheap too! As a wdwrkr, I’m always on the lookout for clamps. I have probably over fifty clamps from 2” to 50” – some I’ve never used since I got them – just a lot of fun collecting them so I can use it whenever I have the need . . . maybe that’s why I like Goofy!

-- LittlePAW - The sweetest sound in my shop, next to Mozart, is what a hand plane makes slicing a ribbon.

View dbhost's profile

dbhost

5378 posts in 1833 days


#19 posted 1593 days ago

Cool. Remember all HF hand tools, clamps included have a lifetime warranty, so you really can’t go wrong…

FWIW, the HF bar clamps I have are not really any less useful than the Jorgensens, which is why I started shopping HF in the first place..

Clamp racks can be simple or complex. Mine currently is simple, but have plans to get more complex soon. Just not a huge priority right now…

Like I mentioned above, here’s hoping you got the F style bar clamps and not the quick release ones. The QR ones are breakage prone…

-- My workshop blog can be found at http://daves-workshop.blogspot.com

View David Craig's profile

David Craig

2130 posts in 1710 days


#20 posted 1593 days ago

Funny thing about that “lifetime guarantee” on hand tools. I went into HF a couple weeks ago. I saw this thread and was curious whether clamps were part of that. So I went in and asked the manager about the lifetime warrantee. “It depends on which handtool it is.” I said “Really? I was under the impression that All meant All,” I replied. She held on to her stance and couldn’t tell me whether or not the clamps I bought and were broken could be exchanged. I was quite frustrated. This weekend, I have money allocated strictly for clamps and they are going to be strictly Kreg, Bessey, and Irwin.

David

-- There is little that is simple when it comes to making a simple box.

View blackcherry's profile

blackcherry

3148 posts in 2424 days


#21 posted 1593 days ago

I’ve pick up large collection of Jorgenson wood clamp, K-body style clamp by Bessy in various sizes, and bar clamp just by keeping a watchful eye on the tool listing on craigslist, saving better than 50 percent off of retail. Here one I just found to give you a example….http://chicago.craigslist.org/wcl/tls/1646728128.html this collection would cost over 200.00 if you payed retail…I hope this idea helps…Blkcherry

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase