LumberJocks

All Replies on VSC tools sharpening jig

  • Advertise with us
View maxhall's profile

VSC tools sharpening jig

by maxhall
posted 01-14-2017 06:47 AM


3 replies so far

View Aj2's profile

Aj2

1389 posts in 1796 days


#1 posted 01-14-2017 03:37 PM

Nope not me I do have one jig that I use for my Japaneese chisels.

https://getsharper.com/

Aj

-- Aj

View Rich's profile (online now)

Rich

2821 posts in 588 days


#2 posted 01-14-2017 03:46 PM

I have not used that specific jig, but I bought one that used the same principle probably 25 years ago. I think it was made by Veritas, but I don’t recall for sure.

My problem with it was that it required constant adjustment when moving to different stages where the abrasive surface was at a different height. The VSC, while I’m sure is a quality item, seems to be even weirder since (at least the way it appears in the video) the top plate is so long that the handle rests on it. That would be awkward for me. Also, how do you ensure the blade is at 90º to the jig?

At that price, for another $50 you could get the WorkSharp. You could also save a bunch of money by going with the Veritas MKII. It’s compact and the roller rides on the abrasive, so you can move from station to station without adjustment. It has a very nice method for setting the angle too. If you have any scrub planes, they also offer a camber roller.

Depending on the amount of work a blade needs, I could be moving from a very flat diamond plate, to sandpaper on glass, and then to two different stones which are of differing heights. It also has a cam adjustment on the roller to allow you to bump the angle by a degree or two to put the final polish on your edge using the 8000+ grit stone.

Even the deluxe Veritas setup is only $125. If you have any skew blades, add the skew registration jig for $33, and you’re pretty much at the same price point as the VSC, with better angle accuracy and versatility.

You can see the MKII here.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View maxhall's profile

maxhall

80 posts in 2200 days


#3 posted 01-15-2017 01:26 AM

I use DMT stones that are all the same thickness, and I put the stones on a piece of float glass or a 18×24x3” granite surface plate. So either way the jig and the DMT are flat in reference to each other. Squaring is an extra step. I would plan on using a machinest square. I also like that since the jig doesn’t need to ride on the stone/abrasive you get a longer stroke. I hadn’t considered the handle of the chisel affecting the jig but that is something to think about. I’ve also considered the MK2 as I know it is very well received on here. Definitely something to consider. Hoping for some feedback from someone that owns this jig.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com