All Replies on Finishing oak?

  • Advertise with us
View alittleoff's profile

Finishing oak?

by alittleoff
posted 01-06-2017 11:01 PM

4 replies so far

View mrbob's profile


182 posts in 806 days

#1 posted 01-06-2017 11:22 PM

Yes if it is dry, for the Poly. I would hit it first after the BLO with a 1.5-2lb cut of dewaxed Shellac, Zinzeer Seal coat is a dewaxed 2lb cut Shellac. The BLO does not need to be dry for that, just no excess on the wood, and I would wipe on the Shellac. Lightly sand with 320 grit, when the Shellac is dry, then do your Poly either water or oil base.
I do it all the time, one of my favorite finish combos.
The birds eye maple here was done that way.

View alittleoff's profile


541 posts in 1514 days

#2 posted 01-07-2017 02:23 PM

Thanks, I was worried, thought I’d messed up. I’ll do it like you said.

View splintergroup's profile


2505 posts in 1460 days

#3 posted 01-07-2017 03:03 PM

Just let the BLO dry for a few days first (I usually wait a week).

View Rick  Dennington's profile

Rick Dennington

6349 posts in 3432 days

#4 posted 01-07-2017 03:16 PM

This is the process I use when I build furniture for customers, or our home…Most people want a natural look to their pieces, so I prep the wood good with the different stages of sanding, and wipe on mineral spirits, let it dry good, and wipe on about 1- 2 coats of Clear danish oil, depending on how the grain looks, and light sanding between coats. Once that’s dry, I use 3-4 coats of a fast drying wipe on poly, sanding with 600-800 grit paper between coats, and putting on the final coat to dry…..

-- " At my age, happy hour is a crap and a nap".....!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics