LumberJocks

All Replies on Quad matched veneer table top

  • Advertise with us
View William Shelley's profile

Quad matched veneer table top

by William Shelley
posted 01-04-2017 11:22 PM


2 replies so far

View Lazyman's profile (online now)

Lazyman

1963 posts in 1386 days


#1 posted 01-04-2017 11:44 PM

How thick is your veneer and what kind of glue are you planning to use to attach the veneer?. Are the edges straight and inside corners square? On a recent project, I used hot hide glue to hammer the veneer to the surface. It was nice because you can move the veneer around to get it perfectly aligned and if it doesn’t work out, you can “unglue” it with a little heat and moisture.

Personally, I think that you may lose some of the affect of the matched veneer if you have a strip between the pieces. If you put the veneer down before you rout the grooves, you are going risk chip out which might completely ruin the top. Also, unless your veneer is fairly thick it may be challenging to set the strips at the right height and fine tune them later. If the veneer is really thin, as much of it is these days, you don’t have much leeway for sanding without risking sanding through the veneer.

Finally, if you have never worked with burl veneer before it can be pretty tricky to work with regardless so practice with some scraps if you can might be a good idea.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View shipwright's profile

shipwright

7980 posts in 2796 days


#2 posted 01-05-2017 01:07 AM

Check out this blog that I did a couple of years ago when I built a couple of tables with four way matched walnut burl.
The process is described and I am available o give you any help I can by PM.
http://lumberjocks.com/shipwright/blog/42311
The process I a little better described here.
http://woodworkingmonthly.com/issue-1-03-september-2016/working-with-veneer-book-matching

-- Paul M ..............If God wanted us to have fiberglass boats he would have given us fibreglass trees. http://thecanadianschooloffrenchmarquetry.com/

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com