LumberJocks

All Replies on Used Jointer Advice

  • Advertise with us
View SteveInVa's profile

Used Jointer Advice

by SteveInVa
posted 01-03-2017 01:41 PM


8 replies so far

View Aj2's profile

Aj2

1787 posts in 1970 days


#1 posted 01-03-2017 03:39 PM

Get the one with the longest tables.
What makes a great jointer s the ability to make a board flat and square.
That takes flat tables that are in the same plane or coplane.
I think the Dj 15 has adjustable cams to align the tables.So if they are flat you good to go.

Aj

-- Aj

View pmayer's profile

pmayer

1032 posts in 3238 days


#2 posted 01-03-2017 03:44 PM

If the DJ-15 is in good condition I’d take that over the Grizzly. The DJ-15 is a sweet machine.

-- PaulMayer, http://www.vernswoodgoods.com

View pintodeluxe's profile

pintodeluxe

5783 posts in 2986 days


#3 posted 01-03-2017 03:47 PM

The DJ15 will be a great serviceable tool. I have the DJ20 and have really enjoyed it. I initially thought the dust collection was sub par, but I have since upgraded to a 2hp collector. Now the jointer is just about dust free.

It also has really sturdy handles for table adjustments. Solid tool.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View SteveInVa's profile

SteveInVa

29 posts in 2129 days


#4 posted 01-04-2017 11:22 PM

Thanks for the advice. Unfortunately, neither seller bothered to reply to my multiple attempts to contact them. The ads remain up, but the silence tells me that they have sold the machines. I was really hoping to grab the DJ15.

Another seller is offering a PM model 50, one of the old green ones that was made in TN. The seller claims that it is in excellent condition and works perfectly. If that is the case, what would be the most one should offer to buy it? He’s asking $1k, which I think is way too much, considering that one can buy a brand new model 54A for about the same price.

As usual, thanks in advance for your advice.

-- Steve

View Lazyman's profile

Lazyman

2559 posts in 1560 days


#5 posted 01-04-2017 11:26 PM

Don’t give up, we have had chronic problems when we list things on CL with the email going to spam (Yahoo) no matter how many times we try to change it. If they listed a phone number, I would try that.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View SteveInVa's profile

SteveInVa

29 posts in 2129 days


#6 posted 01-05-2017 03:47 AM

That PM Model 50 was made in 1979. Thoughts on how much is a fair price, presuming that it in the excellent condition that the seller claims?

Thanks.

Steve

-- Steve

View MrUnix's profile

MrUnix

7004 posts in 2371 days


#7 posted 01-05-2017 05:09 AM

$1000 is stupid high IMO… It has a lot to do with location, but there is a beautifully restored PM50 on a mobile base down here right now with an asking price of $400, which I would consider about the upper end on price.

And no matter what you go with, unless it’s been recently restored (like the one above) and/or you know for sure, figure on another $50-$100 for bearings, new knives or existing ones sharpened, new belt, etc…. on top of what you pay for the machine.
Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View SteveInVa's profile

SteveInVa

29 posts in 2129 days


#8 posted 01-05-2017 12:49 PM

Thanks for the reference and the advice, Brad. I offered 300 as a starting bid, and he came back with 700 as a beginning point of conversation. I’ll keep looking.

-- Steve

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com