LumberJocks

All Replies on Looking for a gem in Michigan

  • Advertise with us
View austin350s10's profile

Looking for a gem in Michigan

by austin350s10
posted 12-30-2016 05:49 PM


7 replies so far

View Fred Hargis's profile

Fred Hargis

4873 posts in 2397 days


#1 posted 12-30-2016 06:04 PM

Well, you said 4 hours so here’s a good one: Frank Miller Lumber in Union City IN. Showed up as 3.5 hours for you when I searched it. They are my #1 supplier, fair prices, and specialize in quarter sawn and rift sawn hardwoods. They also stock very good cabinet grade hardwood plywood in most species (including pre finished) made by Columbia Forest Products, and have a limited selection of exotics. but there’s little doubt there are places closer than may serve you just as well. But also check out Ken Craft company in Toledo.

-- Our village hasn't lost it's idiot, he was elected to congress.

View ChefHDAN's profile

ChefHDAN

1010 posts in 2753 days


#2 posted 12-30-2016 06:06 PM

Within 50 miles of 48201, Woodfinder.com shows these,

Woodcraft – Canton, MI Canton MI (16 miles)
Rockler Woodworking and Hardware #8 Detroit (Royal Oak) MI (19 miles)
Woodcraft – Sterling Heights, MI Sterling Heights MI (26 miles)
B&B Heartwoods, Inc. Ann Arbor MI (29 miles)
John’s Urban Timber by John Haling Whitmore Lake MI (33 miles)
Armstrong Millworks, Inc. Highland MI (35 miles)
Woodcraft – Toledo, OH Toledo OH (49 miles)

You can get good wood at the rockler & woodcraft, but I’d check out B&B heartwoods first since you’ve got the equipment to dimension and surface from rough. I generally find much better prices and the sawmill folks tend to cut deals when I’m buying a fair bit or sell me cutoff’s for cheap.

-- I've decided 1 mistake is really 2 opportunities to learn.. learn how to fix it... and learn how to not repeat it

View Kazooman's profile

Kazooman

932 posts in 1856 days


#3 posted 12-30-2016 06:22 PM

Johnson Lumber in Charlotte.

http://theworkbench.com/

View jdmaher's profile

jdmaher

418 posts in 2483 days


#4 posted 12-30-2016 08:24 PM

You might want to contact LumberJock’s own Rich Eberly. He might have what you need, now or in the future.

-- Jim Maher, Illinois

View Redoak49's profile

Redoak49

3075 posts in 1892 days


#5 posted 12-30-2016 09:12 PM

I use Hickory and Oak Sawmill near Decatur, Michigan. They are a real gem with great wood and prices. Nice people to deal with. Does a fair job on measurements.

It is a couple hour drive for me but is also near wine country. Last time I was there, I got quarter sawn red oak, poplar, ash, quarter sawn sycamore (one of my favorites), and some maple.

I get mine planed to about0.875 and straight line ripped.

They do not have plywood but the hardwood is great.

Johnson Lumber is also another great place.

View Jeff2016's profile

Jeff2016

115 posts in 768 days


#6 posted 12-30-2016 09:33 PM

You can also keep on eye on CL. There have been a few small sawyers popping up lately along with the regulars.
I have a small source for logs and a built a chain saw mill, so I keep an eye on listings but haven’t had the need yet.

Armstrong Mill Works is right down the road from me in Highland.

Welcome to the site!

-- Proud owner of an electronics free workshop. Please check your cell phone at the door!

View austin350s10's profile

austin350s10

4 posts in 416 days


#7 posted 12-30-2016 09:36 PM

Thanks everyone….sounds like I have some exploring to do. Looking forward to getting my feet wet!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com