LumberJocks

All Replies on Router Table Extension for Delta Unisaw

  • Advertise with us
View builtinbkyn's profile

Router Table Extension for Delta Unisaw

by builtinbkyn
posted 12-27-2016 09:15 PM


9 replies so far

View bearkatwood's profile

bearkatwood

1619 posts in 1094 days


#1 posted 12-28-2016 12:34 AM

The one I have on mine which I believe is original to the model has a wood under-framing with a formica top. It has sagged and is in need of replacement. Sorry that doesn’t answer your question, but if you were to make your own I would chose a very sturdy material and make it beefy as routers are heavy and if you want a flat bench top you will need to make allowances for this. Obviously steel would be the best choice. Best of luck.
I will watch this thread to see if you find one, I would love to get my hands on one too.

-- Brian Noel

View builtinbkyn's profile

builtinbkyn

2620 posts in 1023 days


#2 posted 12-28-2016 12:47 AM

Thanks Brian. Yeah I thought about the weight and it’s why I was thinking of using a solid material such as Corian. I have a new Triton TRC 001 for the table. It’s pretty heavy. I’d use two 3/4” layers to achieve a 1 1/2” thick top. My other option is to visit one of the neighboring businesses to my shop where they fabricate from marble and granite. A granite top milled to accept an Incra plate would be nice. Just not sure what that would set me back. I guess they have “scrap” pieces that are too small for kitchen work that may be reasonably priced. The fabrication work to accept the plate would be where the cost starts to escalate. I guess the answer is no in so far as a pre-made solution goes.

-- Bill, Yo!......in Brooklyn & Steel City :)

View bearkatwood's profile

bearkatwood

1619 posts in 1094 days


#3 posted 12-28-2016 12:52 AM

I have been putting off building a replacement because in all honesty I would much rather remove it all together. My shop is small so it works for now, but if I had the room I would remove all vises and routers from my large assembly table/table saw and just have it as a dedicated table saw. It is way too easy for things to get piled up there and then “Oh, I will just make this one little cut” and shove the pile over just far enough to use the blade. BAD IDEA, very dangerous. SO if it were up to me it would just be a table saw. But being that my shop is small and real estate is limited, multi purpose work spaces will have to remain the norm. One of these days though ;) lol

-- Brian Noel

View builtinbkyn's profile

builtinbkyn

2620 posts in 1023 days


#4 posted 12-28-2016 01:57 AM

Same here. Multipurpose is how I need to go. What I’m trying to do is eliminate the dedicated router table. I tend to pile junk on it anyway. I’d much rather reclaim that real estate to spread out things a bit. Right now the bandsaw is jammed up against it and between the planer. I’d probably use the router in the table more often. As of now, I have to pull it out and away from the other machines to use it or them.

-- Bill, Yo!......in Brooklyn & Steel City :)

View builtinbkyn's profile

builtinbkyn

2620 posts in 1023 days


#5 posted 12-28-2016 02:04 AM

This is how things stand as of now after juggling a few things around. The drill press really needs to come off of the floor and get a dedicated base with wheels. Oh the router table is a converted Craftsman Benchmate :)

-- Bill, Yo!......in Brooklyn & Steel City :)

View Holbs's profile

Holbs

1922 posts in 2112 days


#6 posted 12-28-2016 02:12 AM

http://lumberjocks.com/reviews/8506
you say 31” deep versus 27” deep? are not all cabinet saws universal in that aspect? If your unisaw is different from mine, I don’t see an issue with using a 27” deep top either way with 4” of nothingness or could add 4” of hard maple.

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter

View AHuxley's profile

AHuxley

725 posts in 3404 days


#7 posted 12-28-2016 02:25 AM


http://lumberjocks.com/reviews/8506
you say 31” deep versus 27” deep? are not all cabinet saws universal in that aspect? If your unisaw is different from mine, I don t see an issue with using a 27” deep top either way with 4” of nothingness or could add 4” of hard maple.

- Holbs

Saws like the new Uni, PM2000 and SS ICS have deeper tables than average, around 31”.

View Holbs's profile

Holbs

1922 posts in 2112 days


#8 posted 12-28-2016 02:31 AM

hmph. go figure :) At auctions, I saw many PM72’s (?) where the table was HUGE. Thought it was only the PM72’s.

-- The Carpenter Bee is derived from the Ancient Greek word wood-cutter

View MrUnix's profile

MrUnix

6845 posts in 2281 days


#9 posted 12-28-2016 02:49 AM

The older Unisaws had a 27” deep table as did most of it’s peers. The new Unisaw has a 31” deep table, the PM2000 is 30.5” and the ICS is 30”. IIRC, the PM72 and Delta 12/14 had 38” deep tables.

I don’t know if they are, but if the bolt holes are the same spacing, one of the generic router table extension wings might work, although you would have the difference in depth to contend with. I have no idea if anyone is making one specifically for the new Unisaw. It probably would be much easier to just add a router to the wooden extension table, and is what I’ve done in the past with good success.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com