LumberJocks

All Replies on Wormy Maple

  • Advertise with us
View Fiddy's profile (online now)

Wormy Maple

by Fiddy
posted 12-24-2016 09:18 PM


4 replies so far

View jeffswildwood's profile

jeffswildwood

2808 posts in 1879 days


#1 posted 12-24-2016 09:31 PM

I too was gifted a quantity of wormy maple. What I am going to do is sacrifice some cut offs and try different finishes. That way I can see what works and what I like.

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View WDHLT15's profile

WDHLT15

1720 posts in 2377 days


#2 posted 12-25-2016 03:47 AM

I like a clear finish on it. Either an alkyd varnish or a satin poly like the Satin Minwax Fast Drying Polyurethane.

-- Danny Located in Perry, GA. Forester. Wood-Mizer LT40HD35 Sawmill. Nyle L53 Dehumidification Kiln. hamsleyhardwood.com

View crippledcarpenter's profile

crippledcarpenter

26 posts in 2348 days


#3 posted 12-26-2016 01:13 AM

it is actually ambrosia maple. caused by the ambrosia beetle. the staining is from there castings as they bore through the wood. every piece is unique. very cool. the finish should be whatever you feel most comfortable with and have had the best success. I like armor seal urethane. oil based, thin , easy to apply and forgiving in application. it is a general finishes product. a alternative finish, depending on what the project is, could be a Danish oil , sand paper applied. takes some time but with the right project, can have stellar results. what ever way you choose, don’t rush the finish. it takes as long as it takes.

-- haste makes firewood.

View Cheapguy82's profile

Cheapguy82

65 posts in 435 days


#4 posted 01-05-2017 03:23 PM

I used poly on it for one of my projects and I liked how it came out. You can go to my ‘projects’ page and check it out. Also, I saw a project that @Boxguy did with ambrosia maple. I think it was called ‘Boxguy goes camo’. He describes his finishing method in another spot, but he used tung oil, then wipe on poly, then paste wax. His stuff is beautiful. I’m still learning…

-- Stephen - Georgia

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com