LumberJocks

All Replies on Cutting out design on 2ft x 4ft pine

  • Advertise with us
View roughcuts's profile

Cutting out design on 2ft x 4ft pine

by roughcuts
posted 12-09-2016 09:54 PM


5 replies so far

View MrUnix's profile

MrUnix

6373 posts in 2108 days


#1 posted 12-09-2016 09:58 PM

If i do that, will the material removed from the blade cause my pieces to all go out of whack?

Depends entirely on what you are trying to do… but it will remove wood, the thickness of your blade. If that will cause things to go ‘all out of whack’, you need to be more descriptive of what you are trying to cut – maybe post a picture of the design or something.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Richard's profile

Richard

1916 posts in 2599 days


#2 posted 12-09-2016 10:15 PM

A Band Saw if you have one will take less wood out than circular saw would . Plus you need to remember that with a circular saw you need to be careful of over cutting the corners if there are any.

View roughcuts's profile

roughcuts

18 posts in 450 days


#3 posted 12-10-2016 02:01 PM

is there a type of skill saw blade that wont wander as much? I could use a straight edge with it to keep it as straight.

View roughcuts's profile

roughcuts

18 posts in 450 days


#4 posted 12-11-2016 12:16 PM

Below is a quick sketch of what I plan on cutting out. Im not worried if the outside edges don’t line up as i can clean them up after

View Mark Shymanski's profile

Mark Shymanski

5621 posts in 3621 days


#5 posted 01-09-2017 10:45 PM

Is any of that waste material, or do you need to reassemble it to look the same way? What are you trying to make?

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com