All Replies on How soon to spray shellac over gel stain?

  • Advertise with us
View Biruski's profile

How soon to spray shellac over gel stain?

by Biruski
posted 12-09-2016 12:57 AM

3 replies so far

View mrbob's profile


182 posts in 739 days

#1 posted 12-09-2016 01:11 AM

When the third coat is dry, since temp and humidity affects that and no info on that, at least 24 hours and wipe wit a rag to see if you get any to wipe off, if so it isnt dry. You could do 2 with a light buffing/ sanding after the first one, green pad or 320, lightly!!! Again, what is lightly on your spraying??? Real subjective!!!

View woodbutcherbynight's profile


5588 posts in 2579 days

#2 posted 12-09-2016 03:01 AM

I agree with testing by wiping with a rag and if anything comes off it is still wet. Once dry to this spec wait say a week. What’s the rush? Let the stain cure. Can’t hurt to wait and waiting too long is much better than applying a finish only to have issues.

You see this alot with people using epoxy. Sure it is dry to the touch in a short time but it takes time to cure. If done right it works well. Rush it and issues come up, usually at a bad time.

-- Live to tell the stories, they sound better that way.

View Biruski's profile


2 posts in 705 days

#3 posted 12-11-2016 07:14 PM

Thanks Mrbob, you’re right it’s difficult to quantify “lightly.”

Alternatively, is there a need for anything beyond one coat of shellac? Again, my goal is just to prevent lift, I’m going to put urethane on top of it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics