LumberJocks

All Replies on Making a decision - PM 1000 30 or 52 inch fence system

  • Advertise with us
View BB1's profile

Making a decision - PM 1000 30 or 52 inch fence system

by BB1
posted 11-26-2016 03:19 AM


13 replies so far

View knotscott's profile

knotscott

8099 posts in 3456 days


#1 posted 11-26-2016 04:05 AM

You could compromise and go with 40” – http://lumberjocks.com/knotscott/blog/34563

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View BB1's profile

BB1

1167 posts in 928 days


#2 posted 11-26-2016 04:13 AM

Thanks for that link. I guess if I went with the 30 ” I could always look into a modification as you noted.


You could compromise and go with 40” – http://lumberjocks.com/knotscott/blog/34563

- knotscott


View Carloz's profile

Carloz

1147 posts in 672 days


#3 posted 11-26-2016 06:01 AM

30” is little tight. I had it and very often wished I had longer fence. My current saw is 36” and still sometimes is not enough for what i want to do, but 52” would take too much space. So if you have space go for 52”

View Fred Hargis's profile

Fred Hargis

5033 posts in 2574 days


#4 posted 11-26-2016 11:54 AM

I like Scott’s idea of 30” and shift the rail. You ave money and get an increase in area. My first TS had a 32” fence, and in the 10 years or so I used it I needed more capacity maybe 7-8 times. I replaced that saw and got a 52” fence and in the subsequent years I’ve use all that capacity maybe 7-8 times. It’s not needed often but welcome those few times I did. Good luck with your choice!

-- Our village hasn't lost it's idiot, he was elected to congress.

View Redoak49's profile

Redoak49

3397 posts in 2069 days


#5 posted 11-26-2016 12:22 PM

I have had two cabinet saws. The first a Jet with 52” rails. I did not use the extra length very often. For me being a bit older, I cannot easily put a full sheet of plywood up on it. My current cabinet saw is a SawStop with the shorter rails and it is fine. I use a track saw to break down full sheets of plywood and a miter saw to cut down longer lengths of hardwood.

To make a decision, consider how you will use the saw and the space it takes up.

View BB1's profile

BB1

1167 posts in 928 days


#6 posted 11-26-2016 12:57 PM

Thank you for the comments. Still not sure- yesterday when looking at my shop space I was leaning toward the 30 inch. After sleeping on it, I’m shifting toward the 52 if I can arrange my shop to accommodate the length. I don’t want to look back on the purchase and regret going “smaller.” However, I’m sure either option will be great. I’ve used my Bosch for many projects over the past 2 years and it has been a very good first table saw – pretty simple to change blades, etc as I had never used a TS prior to purchasing. Have learned much and now see the value and safety a larger saw can provide.

View Carloz's profile

Carloz

1147 posts in 672 days


#7 posted 11-27-2016 09:25 AM

Also longer fence is more important if you do not have a miter saw

View SweetTea's profile

SweetTea

337 posts in 740 days


#8 posted 11-27-2016 10:46 AM

You definitely want to go with the 52” rip compacity model of that saw. If you ever decide to build any cabinets or any other various projects that would require more than a 30” rip compacity then you will be glad you bought this one. Also, if you buy the 30” version, you might find one day that you regret not getting the 52” version and if you try to modify your saw by purchasing new guide rails you will find that it will cost a whole lot more than $100.

Go with the 52” version and you will be happy you did. You never hear anyone say; “man I bought the 52” version of my cabinet saw and wish that I had bought the 30” version”. lol

View Woodchuck2010's profile

Woodchuck2010

712 posts in 939 days


#9 posted 11-27-2016 09:09 PM


You definitely want to go with the 52” rip compacity model of that saw. If you ever decide to build any cabinets or any other various projects that would require more than a 30” rip compacity then you will be glad you bought this one. Also, if you buy the 30” version, you might find one day that you regret not getting the 52” version and if you try to modify your saw by purchasing new guide rails you will find that it will cost a whole lot more than $100.

Go with the 52” version and you will be happy you did. You never hear anyone say; “man I bought the 52” version of my cabinet saw and wish that I had bought the 30” version”. lol

- SweetTea

I agree. I have the PM1000 30” because of my small basement shop. I’d have gotten the 52”, but it’s just too big for my shop.

-- Chuck, Michigan,

View Loren's profile

Loren

10477 posts in 3728 days


#10 posted 11-27-2016 09:33 PM

Considering how much you’ll be spending on
the table saw, perhaps consider the 30” fence
to save space and a track saw for cross-cutting
4×8 sheets.

In order to get real accuracy in 48” full-sheet
crosscuts you need a big outfeed table and
an extension table on the left side of the saw
anyway. That’s why cabinet shops bury these
saws in massive tables to get panel saw type
performance. A track saw is more fuss to
set up the cut, but accuracy is more certain
unless you have those support tables.

View Joe Andrews's profile

Joe Andrews

68 posts in 2080 days


#11 posted 11-27-2016 09:50 PM

If you’re anything like me, go with the 52”. You’ll be able to pile a lot more crap on the table. Just like long arms on a treadmill. Holds more clothes!

View OggieOglethorpe's profile

OggieOglethorpe

1276 posts in 2191 days


#12 posted 11-27-2016 10:23 PM

I like a 52 because the fence also makes a great stop for dadoing, crosscuts, etc… With a proper standoff when through cutting.

Plus, it’s a place to put down the work as parts are picked up, cut and put back down.

Rarely do I cut full sheets, but I sure use the fence past 30” a lot. I crosscut lots of multiple copy parts between 30” and 52” long…

View BB1's profile

BB1

1167 posts in 928 days


#13 posted 11-28-2016 01:56 AM

Decided on the 52 inch since I feel I can rearrange the shop to accommodate the space. MUCH thanks to everyone for the comments and suggestions. Had to schedule shipment for later in December when I can be home for the delivery. Hopefully the setup will be doable as this is the biggest item by far for my shop. Again – thanks to everyone for taking the time to respond.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com