LumberJocks

All Replies on Another expensive Tool from Woodpecker

  • Advertise with us
View MrRon's profile

Another expensive Tool from Woodpecker

by MrRon
posted 10-25-2016 05:51 PM


12 replies so far

View bbasiaga's profile

bbasiaga

1232 posts in 1992 days


#1 posted 10-25-2016 06:06 PM

I saw this. I could see some advantage in making your own. I am an hour away from a wood store, so if I need a dowel I don’t have it usually waits for at least the next weekend. I don’t do enough with dowels to justify this, but I could see how it would be worth it to some.

I have a woodpeckers layout tool and a 36”ruler. Very nice. Not the cheapest, but worth it over cheaper models IMO. The value I perceived out of the easy to read markings and additional flexibility the tools gave me was worth the extra. Not all of their offerings stack up as well for me.

Brian

-- Part of engineering is to know when to put your calculator down and pick up your tools.

View Woodknack's profile

Woodknack

11619 posts in 2377 days


#2 posted 10-25-2016 06:16 PM

I go to the store with a caliper and buy the size I want. Biggest problem I’ve seen isn’t dowels sized wrong but labeled wrong, metric dowels labeled as inch. Also a good idea to pick up some metric drill bits, they aren’t very expensive.

-- Rick M, http://thewoodknack.blogspot.com/

View Loren's profile

Loren

10384 posts in 3645 days


#3 posted 10-25-2016 07:26 PM

Old Stanly dowelmakers go for about $400. I think
they may have been a high end tool even when
made new.

View HokieKen's profile

HokieKen

4989 posts in 1135 days


#4 posted 10-25-2016 07:36 PM

For the cost of this press, you can buy a good midi-lathe and make any size dowel you need from any type of wood.


I go to the store with a caliper and buy the size I want. Biggest problem I ve seen isn t dowels sized wrong but labeled wrong, metric dowels labeled as inch. Also a good idea to pick up some metric drill bits, they aren t very expensive.

- Rick M.

Biggest issue I’ve seen w/ big box store dowels is egg-shaping and inconsistent diameter down the entire length. Of course, a steel plate with the proper side hole and a mallet will fix those issues.

-- Kenny, SW VA, Go Hokies!!!

View splintergroup's profile

splintergroup

2010 posts in 1219 days


#5 posted 10-25-2016 08:12 PM

They have a shop full of CNC equipment they need to keep fed so I don’t blame them for trying out new product ideas, but wow! $$$$

I agree there are plenty of alternatives to making your own dowels that are a lot cheaper, but this undoubtedly is the Festool of dowel shavers.

View Mark Felton's profile

Mark Felton

3 posts in 1701 days


#6 posted 10-25-2016 08:25 PM

Here’s a different but somewhat similar approach…for a similar price!

http://www.leevalley.com/US/wood/page.aspx?p=42331&cat=1,180,42288

-- Mark, Overland Park, KS

View splintergroup's profile

splintergroup

2010 posts in 1219 days


#7 posted 10-25-2016 08:28 PM



Here s a different but somewhat similar approach…for a similar price!

http://www.leevalley.com/US/wood/page.aspx?p=42331&cat=1,180,42288

- feltonm

Yes!

But of course you are not limited to 6” and have to crank a screw 40 turns for each dowel you want to make….

View Woodknack's profile

Woodknack

11619 posts in 2377 days


#8 posted 10-25-2016 09:45 PM



Biggest issue I ve seen w/ big box store dowels is egg-shaping and inconsistent diameter down the entire length.

- HokieKen

You know, I’ve never had those problems, but now it will happen the very next time I use dowels :)

-- Rick M, http://thewoodknack.blogspot.com/

View BurlyBob's profile

BurlyBob

5491 posts in 2262 days


#9 posted 10-25-2016 10:54 PM

I bought one of their squares and love it. I’m going to buy the 12” square and that’s probably all I need. I’m pretty sure I could buy more dowels than I’ll ever need for that $399.95! You know that $399.95 would go a long way towards other stuff I need more.

View JBrow's profile

JBrow

1354 posts in 917 days


#10 posted 10-26-2016 01:17 PM

Rick M.,

Thanks! That is a great tip; buy some metric drill bits. I think you identified the problem I have encountered, dowels sold using imperial measurements but that do not fit quite right. The fit is off just enough to make me think the dowels I bought were metric rounded to imperial dimensions. While I rarely use dowels, mostly to pin a mortise and tenon joint, I would rather avoid the time required to reduce the diameter of a store bought dowel to fit into an undersized hole.

Therefore, I will buy a metric drill bit set and follow BurlyBob’s suggestion and buy the dowels I need. I agree with BurlyBob since I shy away from working with exotic hardwoods. A lot of dowels can be bought for $400. But then if I worked with exotics, I might consider the Woodpecker’s dowel maker. Woodpecker’s does seem to make quality tools.

View mike02130's profile

mike02130

167 posts in 669 days


#11 posted 10-26-2016 01:55 PM

Made for “enthusiasts”?

-- Google first, search forums second, ask questions later.

View Woodknack's profile

Woodknack

11619 posts in 2377 days


#12 posted 10-26-2016 08:40 PM

I’m surprised no one has invented compressed dowels, a little glue or moisture from the air and they will expand a bit and probably never come loose unless you move to a desert. And if you read this and invent them, I’d like a nice Christmas present once you make your first million.

-- Rick M, http://thewoodknack.blogspot.com/

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com