LumberJocks

All Replies on Mini lathe advice - Jet or Delta

  • Advertise with us
View JoeNJ's profile

Mini lathe advice - Jet or Delta

by JoeNJ
posted 10-09-2016 02:40 PM


14 replies so far

View TheDane's profile

TheDane

5524 posts in 3807 days


#1 posted 10-09-2016 02:54 PM

I would go with the Delta. Larger swing, longer bed, and twice as powerful motor.

I had one for a little over 4 years, and loved using it. Never had a problem with it. I sold it when I upgraded to a lathe with 20” swing.

You’ll get some negative comments about Delta’s support and parts, but since I never had an issue with either parts or support, to me that was a non-issue.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View JoeNJ's profile

JoeNJ

37 posts in 1420 days


#2 posted 10-09-2016 03:26 PM

Hey, thanks for the advice. I was leaning toward the Delta so I could have a few bucks left over for some decent tools and accessories. The $200 price difference may make up my mind for me but just didn’t want to overlook something. Thanks again. – Joe

View waho6o9's profile (online now)

waho6o9

8418 posts in 2721 days


#3 posted 10-09-2016 03:38 PM

View Woodmaster1's profile

Woodmaster1

1041 posts in 2731 days


#4 posted 10-09-2016 04:12 PM

Go with the Delta. I have a Rikon 12” variable speed that is great. The price on the Delta is too good to pass on.

View JoeinGa's profile

JoeinGa

7739 posts in 2151 days


#5 posted 10-09-2016 05:16 PM

If you go with that Delta, butter jump on that link that Wahoo posted. The price was steadily dropping, dollar by dollar, for almost 2 days and it bottomed out at about $360. The price has just started to creep back up and I doubt if you wait much more than today, they’ll be sold out at that excellent price.

Remember …
.
.

.
.

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View Woodknack's profile

Woodknack

12369 posts in 2524 days


#6 posted 10-09-2016 05:38 PM

You should buy the delta before the price goes back up.

-- Rick M, http://thewoodknack.blogspot.com/

View HorizontalMike's profile

HorizontalMike

7770 posts in 3058 days


#7 posted 10-09-2016 05:43 PM

Ditto on Delta!

Had mine for +4yr!

-- HorizontalMike -- "Woodpeckers understand..."

View JoeNJ's profile

JoeNJ

37 posts in 1420 days


#8 posted 10-09-2016 05:50 PM

All, thanks so much for your input. I agree with all of you that the price is just too good to pass up. I think I’m going to place the order today. Now if I could only turn (and sell) enough pens to pay for it, I’ll really be all set.

Thanks again for your advice.

View JoeNJ's profile

JoeNJ

37 posts in 1420 days


#9 posted 10-10-2016 09:23 PM

Wow, joeinGa, you weren’t joking. Waited until today to order…in the morning it was $358…by the time I placed my order later in the afternoon it jumped to $385. Still a bargain but glad I didn’t wait any longer.

View JoeinGa's profile

JoeinGa

7739 posts in 2151 days


#10 posted 10-10-2016 10:48 PM

Yup. Sometimes you gotta be quick to jump on a good deal. I saw about 5 this morning it was at $353, but when I looked at noon it had jumped up to $358. And just now ( at 6:40pm) it’s up to $387.49

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View moke's profile

moke

1240 posts in 2920 days


#11 posted 10-12-2016 05:58 PM

Put me down for a Delta too…..I had one for 6 years and it served me well. I too, bought a lathe with a bigger swing, but the Delta made lots and lots of pens, pepper mills and whatever else struck my fancy.
A fellow in my turning club had a Jet and put two or three switches in it. He said it was not hard to do, and they were not expensive, it was annoying. Now I see they have a new model so maybe they have addressed that, I don’t know. I think you made a good choice.
Mike

-- Mike

View TheDane's profile

TheDane

5524 posts in 3807 days


#12 posted 10-12-2016 06:05 PM

Here’s a video that shows a problem one turner has with the newer model Jet: https://youtu.be/MQVFqmBIGKk

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

View JoeNJ's profile

JoeNJ

37 posts in 1420 days


#13 posted 10-13-2016 04:19 AM

Moke, thanks for your input. My Delta should arrive tomorrow…I was expecting it next week so I get to play around sooner than I planned. Just finished up the bench that it will be mounted on today.

The Dane, I think the bowl that guy was turning in that video was borderline beyond the capacity of that tool. Could explain why it kept cutting out like that. Perhaps an internal safety to prevent overheating?? The research I did said the Delta had the appropriate size motor for those bigger type bowls.

Very glad I went with the Delta. Once I get turning I’ll post a review on here. Still can’t believe the price jumps around like that.

View TheDane's profile

TheDane

5524 posts in 3807 days


#14 posted 10-13-2016 01:54 PM

The Dane, I think the bowl that guy was turning in that video was borderline beyond the capacity of that tool. Could explain why it kept cutting out like that. Perhaps an internal safety to prevent overheating?? The research I did said the Delta had the appropriate size motor for those bigger type bowls.

Right on. I turned blanks that size on my Delta 46-460 with no issues.

-- Gerry -- "I don't plan to ever really grow up ... I'm just going to learn how to act in public!"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com