All Replies on Cooking paddle finish

  • Advertise with us
View jonlan's profile

Cooking paddle finish

by jonlan
posted 09-23-2016 08:45 PM

6 replies so far

View ChefHDAN's profile


1227 posts in 3086 days

#1 posted 09-23-2016 09:02 PM

I’ve got wooden spoons of beech, maple, cherry, and even a walnut one, you’re on the mark with the tight grain. For finish i use the same block oil i use on the wooden cutting boards. You really aren’t going to boil the spoon/paddle, yes it’s going to get immersed in boiling & hot liquids but you’ll stir and then set it aside. If you want to use a paddle that can sit in the pot I’d recommend a SS paddle like we use for 60 80 or 100+ gallon kettles. I’m cheap and hate to waste oil in a towel when I oil the big cutting board and just use my hands, when I’m done i “dry” my hands on whatever wooden spoons look to need oil and rub them down.

-- I've decided 1 mistake is really 2 opportunities to learn.. learn how to fix it... and learn how to not repeat it

View jonlan's profile


61 posts in 1123 days

#2 posted 09-23-2016 09:07 PM

I’ve never used block oil before but I imagine it yields similar results to wax melted down with oil. Im guessing it’s just more oil than wax and that’s why it’s liquid at room temp. My initial concern with that kind of treatment was that it would come off in the water and get on the food. Maybe that’s not a valid concern though.

View Kazooman's profile


1265 posts in 2188 days

#3 posted 09-23-2016 09:42 PM

I would be inclined to “go commando” and leave the wood unfinished. The oil/wax finishes are not going to stand up to stirring a boiling pot of water. The oil and wax shouldn’t harm your seafood, but I don’t think that they will offer the wood any protection.

This is meant to be a tool, not a display piece, correct? Make it from a piece of maple, use it, and retire it if it gets too gnarly looking. I have several cheap wooden spoons that I have used in the kitchen for decades. Never had any finish on them and they never will. They all stir the pot just fine.

Any staining from the spices in the boil will add character to the spoon. Just make it and use it.

View lew's profile


12496 posts in 3991 days

#4 posted 09-24-2016 12:33 AM

Maple. No finish

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View DirtyMike's profile


637 posts in 1138 days

#5 posted 09-24-2016 01:19 AM

40/60 beeswax and mineral oil finish. it should keep your paddle looking great and not melt into your food, and if it does its edible.

View Woodknack's profile


12463 posts in 2616 days

#6 posted 09-24-2016 03:00 AM

Maple, no finish, would be my vote. No oil or wax is going to stand up to boiling water anyway.

-- Rick M,

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics