LumberJocks

All Replies on Are T-Track components and accessories interchangeable among brands

  • Advertise with us
View HarveyDunn's profile

Are T-Track components and accessories interchangeable among brands

by HarveyDunn
posted 02-08-2014 01:24 AM


16 replies so far

View CharlesA's profile

CharlesA

1929 posts in 545 days


#1 posted 02-08-2014 01:33 AM

Another source is Lee Valley. Someone may have a more complete answer, but for me the big decision is between t track that will accept 1/4” bolts and those that only accept t bolts. Lee valley won’t do 1/4”, but incra and Kreg (I think) accepts 1/4”.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

View jimr1cos's profile

jimr1cos

14 posts in 634 days


#2 posted 02-08-2014 04:56 AM

I recently bought from Incra and Kreg; they both accept 1/4 in but the heights are different.
Jim

View ksSlim's profile

ksSlim

1011 posts in 1637 days


#3 posted 02-08-2014 05:03 AM

Short answer, no!
look for spec drawings, different height, outside profile, (hump on outside), hardness.use

As was already answered, several use or accept .250 hex head bolt, others require T-bolt.

-- Sawdust and shavings are therapeutic

View lepelerin's profile

lepelerin

334 posts in 1073 days


#4 posted 02-08-2014 05:57 AM

FYI Freud makes T Track too.

View BJODay's profile

BJODay

394 posts in 691 days


#5 posted 02-09-2014 12:30 AM

I had some track that only took T-bolts, but I had to file the heads to make the bolts a little narrower. Now I purchase Kreg track. I think it is better and more versatile.

BJ

View DrDirt's profile

DrDirt

2597 posts in 2490 days


#6 posted 02-09-2014 12:37 AM

you can get inexpensive t-track from McMaster carr.

http://www.mcmaster.com/#t-tracks/=qlzs4p

their track is for 1/4-20 bolts, but is about 3dollars/foot.

-- "If we did all the things we are capable of doing, we would literally astonish ourselves." Edison

View Loren's profile

Loren

7822 posts in 2395 days


#7 posted 02-09-2014 12:52 AM

It’s all pretty similar in my experience… I think the stuff that
takes the 7/16” nuts is actually “mini” t-track. What you
should not expect to be able to do is lay tracks from
different suppliers in the same grooves at the same depths.

Generally the stuff won’t take a carriage bolt (which has a
nice square section to prevent twisting adjacent to the head)
unless you grind flats on two sides and take some material
off the top. The brass thumb screws I got for 1/4-20
threads don’t thread onto toilet bolts, though standard
1/4-20 nuts do.

-- http://lawoodworking.com

View HarveyDunn's profile

HarveyDunn

286 posts in 479 days


#8 posted 02-09-2014 01:02 AM

OK, that’s a good point. What I’m most interested in is the ability to buy the gizmos from whomever has the most cleaver-seeming ones.

View CharlesA's profile

CharlesA

1929 posts in 545 days


#9 posted 02-09-2014 01:09 AM

That’s why I’ve chosen the most versatile t-track—to not limit options.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

View Fish22's profile

Fish22

64 posts in 1861 days


#10 posted 02-09-2014 01:10 AM

I prefer the Incra t track and t track plus.

-- Bryan, South River, NJ

View TopamaxSurvivor's profile

TopamaxSurvivor

15075 posts in 2423 days


#11 posted 02-09-2014 01:20 AM

Loren, Did you try cleaning the brass t screws up with a 1/4-20 tap?

CharlesA, Which do you use that is the most versatile?

-- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View CharlesA's profile

CharlesA

1929 posts in 545 days


#12 posted 02-09-2014 02:12 AM

When I built my router table I just grabbed some t-track somewhere not realizing the difference. I bought a Freud type router fence and when I tried to install it discovered that it would punt accept the 1/4 inch bolts that were standard. There are workarounds, but it can be a pain in the short term. Since then I have replaced that t-track and installed new t-track sung only Kreg or incra that will accept about anything. That’s what I meant by versatile. I don’t use t-track in huge quantities, so I’m not looking to save a lot of money when I know these will work.

-- "Man is the only animal which devours his own, for I can apply no milder term to the general prey of the rich on the poor." ~Thomas Jefferson

View Loren's profile

Loren

7822 posts in 2395 days


#13 posted 02-09-2014 02:17 AM

Topamax – no, and that’s a good idea as maybe the peaks
in the threads are a little high. The toilet bolts also have that
gold color coating and maybe it fools with the fit.

-- http://lawoodworking.com

View Vertigo's profile

Vertigo

826 posts in 385 days


#14 posted 02-09-2014 02:47 AM

I think incra makes the best t track

-- Greg - Ferdinand and Son Construction: Do it right the first time. Like us on Facebook

View TopamaxSurvivor's profile

TopamaxSurvivor

15075 posts in 2423 days


#15 posted 02-09-2014 06:23 AM

Thanks, I’ll keep Kreg and incra in mind. I haven’t made anything using it yet, but if it is a PIA, it is not a bargain at any price ;-)

-- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Loren's profile

Loren

7822 posts in 2395 days


#16 posted 02-09-2014 06:51 AM

http://www.woodline.com/

I think it’s all more the same that it is different. You can rely
on it only in one axis, which is all you can expect. The “neck”
of your bolt sliding in the track mouth will restrict the
tiny variants if you need to position parts in 2 axis setups.

-- http://lawoodworking.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase