LumberJocks

All Replies on Old Ridgid jointer for $200 - yay or nay

  • Advertise with us
View noone's profile

Old Ridgid jointer for $200 - yay or nay

by noone
posted 06-20-2013 08:43 PM


31 replies so far

View knotscott's profile

knotscott

5512 posts in 2060 days


#1 posted 06-20-2013 08:58 PM

I wouldn’t be happy to pay $200, but it’s not a terrible deal either. $350 was nuts, but $200 could be fair if it runs well and the rust isn’t overwhelming. Gonna need some TLC.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Tennessee's profile

Tennessee

1466 posts in 1199 days


#2 posted 06-20-2013 09:45 PM

It is really hard to tell if some critical parts are missing, as in fence parts. The fence is there, but are all the bolts, nuts, handles, adjustment thingys, etc.
To me, $200 of junk that needs 20 hours of work to make it to your standards at even $10 an hour makes that a $400 jointer. At that point, I think I would seriously consider a new one.

-- Paul, Tennessee, http://www.tsunamiguitars.com

View noone's profile

noone

410 posts in 957 days


#3 posted 06-20-2013 09:51 PM

I tend to agree. ^^^^

$300 more for brand new is not a whole lot more in the big picture.

View toolie's profile

toolie

1767 posts in 1313 days


#4 posted 06-20-2013 10:19 PM

FWIW, those older units are just built better than the newer OWT manufactured units. and they do carry a lifetime guaranty against manufacturing defects that independent of ownership. IMHO, $200 is a fair price for that jonter, assuming all it needs is a little TLC>

-- there's a solution to every problem.......you just have to be willing to find it.

View kdc68's profile

kdc68

1995 posts in 962 days


#5 posted 06-20-2013 10:23 PM

I tend to agree. ^^^^

$300 more for brand new is not a whole lot more in the big picture.

noone......I have this Grizzly jointer…owned more than a year now…no complaints…

http://www.grizzly.com/products/6-x-46-Jointer/G0654

I know nothing good or bad about this….just passing along the info that in the same price range

http://www.sears.com/craftsman-professional-1-1-2-hp-6-1-8-jointer-planer-21705-/p-00921705000P

-- Measure "at least" twice and cut once

View Grandpa's profile

Grandpa

3178 posts in 1360 days


#6 posted 06-20-2013 11:36 PM

toolie are you sure that lifetime warranty isn’t for the original owner only. I had to register my tools and have a warranty card. He would need to get that for sure.

View Dusty56's profile

Dusty56

11663 posts in 2373 days


#7 posted 06-21-2013 03:50 AM

The beds and fence will clean up in no time.
I sold mine, same model , last year for $275. Beds were flat and co-planar and fence was perfectly straight.
I had installed new knives prior to selling it. They’re cheap and readily available.

-- I'm absolutely positive that I couldn't be more uncertain!

View emart's profile

emart

242 posts in 1313 days


#8 posted 06-21-2013 03:57 AM

I would say it depends on how much time and money you have. if you have a lot of time on your hands like i do it might be worth it to buy this and tinker with it but if you dont have much time it may be worth your while to save up and buy a better one. I paid $100 for my worthless craftsman jointer and I definitely regret it. it can flatten boards fine but even with brand new blades on it the jointer doesnt give me a very smooth edge at all. typically i would joint a board then turn around and run it through my radial saw after to get rid of the missing chunks.

-- tools are only as good as the hands that hold them https://www.custommade.com/by/emeraldcrafts/

View Dusty56's profile

Dusty56

11663 posts in 2373 days


#9 posted 06-21-2013 01:11 PM

emart, which direction is the grain running when you get
“missing chunks” ? Sounds like operator error.
” tools are only as good as the hands that hold them”

-- I'm absolutely positive that I couldn't be more uncertain!

View emart's profile

emart

242 posts in 1313 days


#10 posted 06-21-2013 06:32 PM

I’m usually pretty careful to inspect my material so that I follow the grain. I have other problems with my cheap jointer like the fence doesnt hold straight very well and even when it doesnt tear pieces out of the wood i never end up with a smooth finish. i have also heard complaints from other LJs about this specific jointer I have

-- tools are only as good as the hands that hold them https://www.custommade.com/by/emeraldcrafts/

View UncannyValleyWoods's profile

UncannyValleyWoods

335 posts in 549 days


#11 posted 06-21-2013 07:48 PM

Don’t do it man. I recently bought a two year old, Jet Gold Series 6 inch for $150. Durn thing had probably 3 hours or less of use on it. Keep searching man.

-- http://www.etsy.com/shop/UncannyValleyWoods

View Dusty56's profile

Dusty56

11663 posts in 2373 days


#12 posted 06-21-2013 10:05 PM

If he came down to $200 already, offer him what you think it’s worth . If he takes it , good for you. If he doesn’t, good for you…it wasn’t meant to be. Sounds like you’re already wanting to spend the $500 anyway : )

-- I'm absolutely positive that I couldn't be more uncertain!

View Tedstor's profile

Tedstor

1369 posts in 1318 days


#13 posted 06-22-2013 12:05 AM

If you’re in the market for a used jointer, I’d strongly consider paying $200 for that Ridgid. I mean better deals do come along from time to time. But how long are you prepared to wait for the occasional $100 steal to show itself? And $200 for that Ridgid is still $200+ cheaper than buying a new machine. Assuming the motor runs, the cutterhead spins, and the table elevation wheels function you could have that machine in working order in no time.
BUT-
If you can afford a new machine. New is good too.

View mvilares's profile

mvilares

11 posts in 485 days


#14 posted 06-22-2013 01:14 AM

If the motor is good and the beds and fence flat and true, a little rust is easy to clean up as long as there is no pitting. I used some RustFree (Boeshield) on mine and now it looks brand new. I have the orange Ridgid jointer and it’s been great.

View toolie's profile

toolie

1767 posts in 1313 days


#15 posted 06-22-2013 01:57 AM

He would need to get that for sure.

that’s for coverage under the LSA. the older gray colored tools predate the LSA. the owners manuals for all the gray colored stationary power tools i own have the lifetime guaranty printed right on them. that lifetime guaranty against manufacturing defects is tool, rather than owner, specific.

-- there's a solution to every problem.......you just have to be willing to find it.

View Dusty56's profile

Dusty56

11663 posts in 2373 days


#16 posted 06-22-2013 01:41 PM

I wish it was near me. I would buy it, clean it up and resell it for a profit.
There’s nothing to these machines that a little elbow grease won’t fix.
If you’re afraid of surface rust, you’re shopping in the wrong store.

I turned this jointer…

in to this jointer : )

-- I'm absolutely positive that I couldn't be more uncertain!

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1190 days


#17 posted 06-22-2013 01:59 PM

Right on Dusty….fine work!!!

-- http://www.PictureTrail.com/gid6255915

View Dusty56's profile

Dusty56

11663 posts in 2373 days


#18 posted 06-22-2013 02:05 PM

Thank you very much, Todd : )
It’s a 1956-7 Powermatic 60, 8” jointer , that I talked the guy down to $80 for it. A true labor of love for me. LOL

-- I'm absolutely positive that I couldn't be more uncertain!

View toolie's profile

toolie

1767 posts in 1313 days


#19 posted 06-22-2013 02:07 PM

Gotta say, nicely done.

-- there's a solution to every problem.......you just have to be willing to find it.

View Dusty56's profile

Dusty56

11663 posts in 2373 days


#20 posted 06-22-2013 02:26 PM

Thank you very much , Toolie : )

-- I'm absolutely positive that I couldn't be more uncertain!

View waho6o9's profile

waho6o9

5066 posts in 1262 days


#21 posted 06-22-2013 02:36 PM

Most excellent restore Dusty56!

View Dusty56's profile

Dusty56

11663 posts in 2373 days


#22 posted 06-22-2013 03:12 PM

Thank you very much, waho : )
I feel it was worth every minute of my time and effort. The former owner was going to scrap it if I didn’t buy it that day. He had already had it in a few tag sales , but nobody wanted it. He actually had it listed on CL as a 6” jointer.
I never told him it wasn’t. LOL

-- I'm absolutely positive that I couldn't be more uncertain!

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1190 days


#23 posted 06-22-2013 03:19 PM

Just goes to show us how nice older tools, like the gray Ridgid jointer in the OP can be with a little TLC.

BTW, I’d go with $200 in my pocket for the Ridgid jointer and offer $175.

-- http://www.PictureTrail.com/gid6255915

View waho6o9's profile

waho6o9

5066 posts in 1262 days


#24 posted 06-22-2013 03:29 PM

You’re welcome Dusty.

Just goes to show what elbow grease and determination can
accomplish.

View distrbd's profile

distrbd

1188 posts in 1131 days


#25 posted 06-22-2013 03:39 PM

As toolie mentioned those Grey Ridgid power tools are worth more when you compare with what’s available in that price range,I have a grey drill press and jointer both are solid,reliable tools,if that jointer is in good working condition,I’d pay $200 and bring it home.

-- Ken from Ontario

View noone's profile

noone

410 posts in 957 days


#26 posted 06-22-2013 04:41 PM

Can someone give me the rundown of what I need to check on this?

Take a straight edge and make sure the bed on both sides is perfectly flat?

Take a 90 triangle and make sure the fence is square?

What else!

View noone's profile

noone

410 posts in 957 days


#27 posted 06-22-2013 04:47 PM

I just noticed that he had sent me close up pictures. Does this looked cracked to you?

Take a look at the full view of this second pic-
http://i1166.photobucket.com/albums/q614/noone3000/23CFC8D4-D918-4938-AB25-2F729D4ED165-30321-0000070D7622DF73_zps1d8c41b2.jpg

View 69BBNova's profile

69BBNova

337 posts in 901 days


#28 posted 06-22-2013 05:02 PM

Its hard to say for sure but it looks just the way a cast iron crack looks…

There seems to be two cracks on the left with what appears to be a potential chip…

And on the right it looks like there is another four cracks in the other side of the throat…

I’d be carefull in thinking it over, but I think I would pass on this one.

View exelectrician's profile

exelectrician

1653 posts in 1112 days


#29 posted 06-22-2013 05:25 PM

looks like a bad crack – I would not buy it.

-- Love thy neighbour as thyself

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1190 days


#30 posted 06-22-2013 05:29 PM

agree…that is a bad crack….pass on it.

-- http://www.PictureTrail.com/gid6255915

View noone's profile

noone

410 posts in 957 days


#31 posted 06-22-2013 08:39 PM

Glad I didn’t waste my time driving out there…...

The search continues….

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase