LumberJocks

All Replies on To distress or not to distress....

  • Advertise with us
View UncannyValleyWoods's profile

To distress or not to distress....

by UncannyValleyWoods
posted 440 days ago


17 replies so far

View Hammerthumb's profile

Hammerthumb

1103 posts in 560 days


#1 posted 440 days ago

I my old hardwood flooring days, we would beat up a floor with chains, motorcycle chains, hammers, spill stains of old used motor oil, cranberry juice, and whatnot prior to finishing. People paid a lot of money for it. I have made a few pieces of furniture where I never used sandpaper, just a hand scraper and card scraper. Can make some interesting pieces this way.

-- Paul, Las Vegas

View Monte Pittman's profile

Monte Pittman

12938 posts in 923 days


#2 posted 440 days ago

Distressed look is definitely “in” in some areas. There is an art to how much to distress it though. They want it rustic but still civilized.

-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability

View bondogaposis's profile

bondogaposis

2416 posts in 936 days


#3 posted 440 days ago

It may be for some folks, but I personally don’t like distressed finishes. I prefer for my furniture to come by it’s distressing honestly over time. I think it is just a fad, next week it will be something else.

-- Bondo Gaposis

View distrbd's profile (online now)

distrbd

973 posts in 1032 days


#4 posted 440 days ago

I love the distressed look on wood furniture,it gives it character,I’m learning how to distress wood ,crackled paint look,it’s an art to make a piece of wood look old but I understand it’s not for every one.

-- Ken from Ontario

View redSLED's profile

redSLED

683 posts in 478 days


#5 posted 440 days ago

Distressing is the art of perfecting imperfection. Remember that most customers are finicky, notably DINKs and hordes of ‘metrosexual’ city folk who consume an extraordinary amount of design information and become ‘opinion leaders’ in their social circles. Distressing must be customized for each customer or target niche market should they desire that look. There are no quantifiable rules about how exactly or how much to distress. When in doubt, refer to distressed expensive pieces that sell, or that successful well-seasoned interior designers regard highly – and you will be covered.

-- Perfection is the difference between too much and not enough.

View Fred Hargis's profile

Fred Hargis

1614 posts in 1079 days


#6 posted 440 days ago

You have to offer what the market wants….but I think I would try it without the distressed look. At least if it doesn’t sell, you’ll have first hand experience on the need to distress, instead of a random comment.

-- I long for the days when Coke was a cola, and a joint was a bad place to be (Merle Haggard)

View Gerald Thompson's profile

Gerald Thompson

331 posts in 820 days


#7 posted 440 days ago

Intentionally distressed furniture looks phoney to me. My finest pieces look distressed enough when I’m done with them anyway.

-- Jerry

View Lee Barker's profile

Lee Barker

2163 posts in 1436 days


#8 posted 440 days ago

A woodworker nearby me (for a while) did distressing to pieces he built for decorators. One day he let me watch.

There were two distinct techniques.

Paint: Usually white first, slopped on (latex). When it was dry, another coat of light green, light blue, that sort of thing. Pastelly stuff. A little sanding, scritchscritchscritch, thorugh to the white on the areas that were obviously available to friction from the outside world. This additional colorprocess could go on maybe twice more, maybe not.

Abuse: A 6d nail through a small length of 1×2, drawn across the grain, leaves a skittered pattern of indentations. He might pound with other objects a little bit, but mostly it was subtler than that.

Corners (of, say, the top on a breakfront) were definitely rounded with coarse sandpaper and then, skipping grits, smoothed where time would have accomplished a similar look.

The most important takeaway was his mental state as he did this. In a zone. He wasn’t bashing on stuff like a simian, he would take a swipe and step back for a nanosecond, squinting, and then do another act on a different area of the piece. It was a highly kinesthetic process; he was almost always in motion during this.

I was enthralled and tucked the experience back in my memory where it remained for 15 or 18 years, to be exhumed this very day.

Kindly,

Lee

-- "...in his brain, which is as dry as the remainder biscuit after a voyage, he hath strange places cramm'd with observation, the which he vents in mangled forms." --Shakespeare, "As You Like It"

View lwllms's profile (online now)

lwllms

535 posts in 1867 days


#9 posted 440 days ago

Distressing is back??? Things do go in cycles, don’t they.

View UncannyValleyWoods's profile

UncannyValleyWoods

335 posts in 449 days


#10 posted 440 days ago

Very interesting…I’m going to have to let all this brew…

-- http://www.etsy.com/shop/UncannyValleyWoods

View oldnovice's profile

oldnovice

3520 posts in 1953 days


#11 posted 440 days ago

This is a very distressing forum ... I don’t like deliberate distressing … it should happen by use!

-- "I never met a board I didn't like!"

View sprucegum's profile

sprucegum

323 posts in 583 days


#12 posted 440 days ago

My wife loves the distressed look me not so much. I have played around with it some it breaks the boredom.

-- A tube of calk and a gallon of paint will make a carpenter what he ain't

View redSLED's profile

redSLED

683 posts in 478 days


#13 posted 440 days ago

“Properly done” distressing can give a newly made piece more “character” – more so with painted pieces. This is easier to achieve with hand-made solid wood furniture.

Like noted above by Lee Barker, I have my own set of ‘special distressing tools and processes’ to use whenever a customer or designer wants something ‘new but old-looking’ with nice patina, weathered look, etc., blablabla. Hint: I have an authentic 20-year old standard ball pein hammer in my ‘distressing arsenal’.

Some of my most satisfying laughter comes when I see really badly done distressed sprayed-on-finish MDF factory pieces at big box stores. The air-pettet gun fake worm holes and flicked-on black paint fake insect poop are my favourites. I just hope they keep doing it for years to come.

-- Perfection is the difference between too much and not enough.

View Cosmicsniper's profile

Cosmicsniper

2199 posts in 1744 days


#14 posted 440 days ago

“Perfecting imperfection.” I like that, redSLED.

To me, I like it for country-style pieces with soft woods. My thought is that by pre-stressing the piece, you don’t have to worry when the normal dents and dings happen…which inevitably happens with regularity with things like pine and fir. Plus, it’s just part of the rustic look. It doesn’t require and paint or finish to achieve the look, and in fact is likely done with a natural finish topped with wax.

Similar for shaker-like pieces, which an be distressed in a fashion like Lee described…though I like milk paint instead of latex.

Other methods, which look really phony to me, use artificial wormholes and other stresses in combination with a hard film finish of some kind. These often include artificial looking glazes as well. It’s an okay look, but looks too mass-produced and off-the-shelf for my tastes…too manufactured looking.

In short, I think it has its place depending on the goal. But it also allows you to use less-quality lumber in a project, especially for a rustic look.

-- jay, www.allaboutastro.com

View Dusty56's profile

Dusty56

11638 posts in 2273 days


#15 posted 440 days ago

If it gets done properly , it can look good , but properly done pieces are few and far between. Most of the stuff I’ve seen has been drastically overdone , often times with “wear” marks in places that barely if ever get touched.
JMHO : )

You can always try to sell your immaculate piece first , and then if it doesn’t sell , let it fall off your truck going down the highway to start the “distressing” process : ) JK

-- I'm absolutely positive that I couldn't be more uncertain!

View 404 - Not Found's profile

404 - Not Found

2544 posts in 1554 days


#16 posted 439 days ago

So now I’m faced with a strange decision. Do I distress the crap out of this table simply to make it marketable to the rich coots in California? Or do I build the table I envisioned and sit on it for months trying to sell it?

How do you intend selling this piece? and is the design such that distressing would look appropriate?

View SnowyRiver's profile

SnowyRiver

51451 posts in 2066 days


#17 posted 439 days ago

I build a lot of replica colonial furniture. I like the distressed look on those pieces providing it looks authentic and not overdone. Beyond what has been discussed already, I have even been known to take a wood burning tool and burn worm tracks and worm holes in the wood too…especially if it is the type of wood that worm holes/tracks are often found. If the piece is supposed to look old and used, I would do the distressing. If not, then leave it alone. Choose your distress points carefully so they are in areas where distressing could possibly occur over time. I think however, if the piece has a lot of natural wood grain, the distressing can sometimes detract from its natural beauty.

-- Wayne - Plymouth MN

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase