LumberJocks

All Replies on What's your favorite wood to work with?

  • Advertise with us
View WoodGoddess's profile

What's your favorite wood to work with?

by WoodGoddess
posted 11-29-2012 04:10 PM


20 replies so far

View Mosquito's profile

Mosquito

4813 posts in 978 days


#1 posted 11-29-2012 04:16 PM

To work with, poplar. Why? Because I enjoy hand tool work (power tool work requires a 30+ mile drive). Poplar can be worked really well with hand tools, and the different grain patterns, inclusions, etc give it a real character.

So far, though, I think my favorite finished woods are Padauk and Red Oak, though I also really like mahogany.

I purchase almost all my wood kiln dried and dimensioned. Other than a hand saw (which I don’t have a dedicated rip saw yet) I have no good means to dimension rough lumber on my own yet. I don’t check moisture levels because I don’t have a moisture meter.

-- Mos - Twin Cities, MN -- Stanley #45 Evangelist - www.youtube.com/MosquitoMods

View Joseph Jossem's profile

Joseph Jossem

386 posts in 954 days


#2 posted 11-29-2012 04:25 PM

i love cuban mahogany cuts sands dries really easy and very stable I get it from tree trimmers easy wood to dry barely moves I dont check moisture

View NiteWalker's profile

NiteWalker

2710 posts in 1262 days


#3 posted 11-29-2012 04:34 PM

Cherry. It works beautifully with hand or power tools and smells great when cut.

-- He who dies with the most tools... dies with the emptiest wallet.

View Surfside's profile

Surfside

3278 posts in 859 days


#4 posted 11-29-2012 05:10 PM

Poplar and Pine are great woods to use.

-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"

View MonteCristo's profile

MonteCristo

2097 posts in 874 days


#5 posted 11-29-2012 07:39 PM

When I saw this post’s title, I thought my answer would be “free”, ie free wood, but a more serious answer is a wood like walnut that is beautiful, fairly easy to work, not super expensive, readily available, domestic, sustainable and not hard on tooling.

Moisture control is very important in something like furniture construction, much less so in carving. ie it depends on what you are planning to do when it comes to secondary issues like moisture, stability . . .

-- Dwight - "Free legal advice available - contact Dewey, Cheetam & Howe""

View JohnnyStrawberry's profile

JohnnyStrawberry

245 posts in 1004 days


#6 posted 11-29-2012 09:56 PM

Beech. It’s strong and hard and easy to cut with any tools and for me the warmest. Steamed beech has wonderful color as well. Beech can move quite a lot though. That’s why I do measure moisture content.
Red willow for its incredible burls. (Tomorrow I’ll post some pictures.)
Larch for durability and for its scent.
I like black locust for its beauty and hardness but it’s not easy to work with.
And what is yours?

-- What are those few hours of mine compared to those decades Mother Nature has put in it!

View HorizontalMike's profile

HorizontalMike

6948 posts in 1599 days


#7 posted 11-29-2012 10:02 PM

I go for “cheap”, but having said that, I like both White Ash and Soft Maple.

The ash is light in color and easy to satin, plus at 1320 Janka it is plenty hard. The Soft Maple at 950 Janka, is a pleasure to work. It saws and planes very easily. Staining is a little more problematic, but who am I to say since I am rather new at staining and have had my challenges.

-- HorizontalMike -- "Woodpeckers understand..."

View Greg..the Cajun  Box Sculptor's profile

Greg..the Cajun Box Sculptor

5178 posts in 1994 days


#8 posted 11-29-2012 10:54 PM

I find it difficult to come up with a single answer…there are so many different types of wood in the world and I am trying to use as many as I possibly can get my hands on..

Some woods are easier to work with but some woods just look nicer. I have always found cherry, walnut, maple, mahogany, teak, padauk and numerous others are easily worked, shaped and sanded. Some woods such as Zebrawood and Wenge, plus others splinter easily…I have my share of splinters to backup this.
Some woods are harder to work but really take a great finish while some work nicely but need alot of pores filled before applying a finish.

-- We all must start somewhere in our journey of doing what we love to do.

View AandCstyle's profile (online now)

AandCstyle

1376 posts in 942 days


#9 posted 11-30-2012 12:48 AM

My favorite wood is qswo. The grain is, IMO, beautiful and I enjoy the smell when I cut it. I live in the desert and store the wood for months in my shop before use so I don’t measure MC. Unfortunately, I have to buy it since it doesn’t grow in central NM.

-- Art

View WoodGoddess's profile

WoodGoddess

100 posts in 753 days


#10 posted 11-30-2012 12:52 AM

I will admit that I’ve only ever worked with maple and cedar. I had to deal with installing my maple hardwood floors and that was my window into a whole new world. I learned that wood needed to cure…to breathe…to adjust. I learned that some wood was harder than others…some would accept stain while others would politely decline.

When I worked with cedar I learned that it’s easy enough to cut and handle but didn’t have as much of a beautiful grain that I admire in other woods.

Thanks for sharing guys! I was wondering what I needed to build my next project. I keep going back and forth. I want to build something that I can use everyday and know that I made it with my own hands. I thought I’d build a bench then I changed that to raised garden beds then to flower beds. I’ve finally decided on building a silverware drawer organizer. I’m not sure what type of wood I’ll need and was hoping to get a good idea by posting this. :-)

View Cosmicsniper's profile

Cosmicsniper

2199 posts in 1844 days


#11 posted 11-30-2012 01:24 AM

Black walnut. It machines easy, reasonably inexpensive, no two pieces seem to look alike, and every piece is gorgeous.

-- jay, www.allaboutastro.com

View Stormy's profile

Stormy

160 posts in 883 days


#12 posted 11-30-2012 01:55 AM

God has given us many beautiful woods with which to work our craft. Don’t limit yourself to any one. Enjoy as many as you can.

-- Stormy: Sometimes the wood just tells you what it wants to be.

View DHaden's profile

DHaden

73 posts in 1344 days


#13 posted 11-30-2012 11:05 PM

Black Walnut and Hard Maple have been my favorites for awhile. I really like the contrast. I bought some cherry last fall, and LOVE IT! They are all fairly tight grained and I really like the way they finish with a good sanding and Danish Oil.

-- Measure once, cut twice.

View DrDirt's profile

DrDirt

2490 posts in 2428 days


#14 posted 11-30-2012 11:16 PM

Walnut – nice grain, great color, and holds carving/details well
Poplar – similar to Walnut but cheaper, but can be finished to look like cherry
Oak – it is cheap and durable

-- "If we did all the things we are capable of doing, we would literally astonish ourselves." Edison

View Woodmaster1's profile

Woodmaster1

498 posts in 1272 days


#15 posted 11-30-2012 11:26 PM

I like quartersawn red oak right now. I used walnut for a while. When I get tired of the quartersawn red oak I am going to try cherry.

View rrww's profile

rrww

263 posts in 799 days


#16 posted 11-30-2012 11:28 PM

I like walnut it looks great and is easy to work. I love the smell of cedar in the shop.

View derosa's profile

derosa

1556 posts in 1521 days


#17 posted 12-01-2012 04:18 AM

I really like cherry and apple and both grow in abundance around me. Apple I get for free, just requires work on my part, cherry I usually pay for.

-- --Rev. Russ in NY-- A posse ad esse

View Lazy_K's profile

Lazy_K

67 posts in 876 days


#18 posted 12-01-2012 04:44 AM

hi, beech, versatile, tough, resilient, nice medium grain pattern, planes, machines and carves well. medium color blonde to red, takes stains well
K

-- Kai SaerPren

View oldnovice's profile

oldnovice

3788 posts in 2053 days


#19 posted 12-01-2012 06:37 AM

The stuff with grain!

  • Actually I have an abundance of native Iowa red oak so I guess it will be mine until I run out.
  • After that I like birds eye maple and birch (not much grain but it can look like so many other woods).

-- "I never met a board I didn't like!"

View doordude's profile

doordude

1085 posts in 1668 days


#20 posted 12-01-2012 07:03 AM

what ever wood i get my hands on, free or purchased; thats my favorite

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase