LumberJocks

All Replies on Still looking for jointer...delta DJ20?

  • Advertise with us
View shelly_b's profile

Still looking for jointer...delta DJ20?

by shelly_b
posted 11-21-2012 01:31 PM


20 replies so far

View chrisstef's profile

chrisstef

10825 posts in 1659 days


#1 posted 11-21-2012 01:39 PM

Im not sure what they go for new but i do know that is one heck of a jointer. I wouldnt ever see a need to upgrade in the future with that battleship. Just dont let the little one land her planes on it.

-- "there aren’t many hand tools as awe-inspiring as the #8 jointer. I mean, it just reeks of cast iron heft and hubris" - Smitty

View shelly_b's profile

shelly_b

841 posts in 770 days


#2 posted 11-21-2012 02:35 PM

The new ones go for about $2000, but they have the parallelogram beds, which I’m not sure if this one does, or how old it is

View chrisstef's profile

chrisstef

10825 posts in 1659 days


#3 posted 11-21-2012 02:47 PM

I would peg it as a 90’s version without the parrellelogram tables. From the pics it looks like its in a storage container so you might be able to talk him down a little or bundle something else with it. Hopefully youve got a couple of mules to move that bad boy. Its gonna be heavy. Real heavy. If i had the dough id buy it.

If you can get the model / serial number you can go over to deltas website and get a date on it. Id bet its all surface rust as well from being in an uncontrolled climate. Should come right off.

Youd want to spin the cutterhead by hand and listen for any grinding which would indicate bad bearings. Also, if you have osme way of checking the bed for flatness that would be a great idea. I dont have a 6’ straight edge personally but a 4’ level might give you a rough idea of flatness. I dunno how you would test it to see if it ran or not if indeed it is in a container but that would be prudent.

Good luck Shelly and keep us posted.

-- "there aren’t many hand tools as awe-inspiring as the #8 jointer. I mean, it just reeks of cast iron heft and hubris" - Smitty

View RogerM's profile

RogerM

445 posts in 1051 days


#4 posted 11-21-2012 05:23 PM

Shelly – I have had a DJ-20 for a little over 8 years and have run all kinds of hardwood through it. It still gives superior performance. I believe that you will find that most all DJ 20 joiners made in the past ten years have the parallelogram tables. I do not see how you could go wrong with this machine.

-- Roger M, Aiken, SC

View shelly_b's profile

shelly_b

841 posts in 770 days


#5 posted 11-21-2012 06:53 PM

Well it sounds like a good buy then but I don’t have a day off until saturday so hopefully he still has it!

View RyanIra's profile

RyanIra

27 posts in 981 days


#6 posted 11-21-2012 08:43 PM

That machine does have the parallelogram tables, you can tell just by looking at it (also, it wouldn’t be a DJ20 if it didn’t). The rust looks superficial. At that price, I would run, not walk, and snap that up as fast as I could. I used to own a DJ20 and loved it. I have the equivalent of a Grizzly G1018 now with the dovetail ways and it works fine as well.

View cabmaker's profile

cabmaker

1311 posts in 1461 days


#7 posted 11-21-2012 09:09 PM

I really hope your not responding because your on your way to pick it up ! Wont be there long.

View AJswoodshop's profile

AJswoodshop

1057 posts in 929 days


#8 posted 11-21-2012 09:39 PM

Looks like a really nice machine. You might have to clean up the rust on the table, and make sure it runs good!

-- If I can do it.....so can you! -AJswoodshop

View shelly_b's profile

shelly_b

841 posts in 770 days


#9 posted 11-22-2012 12:04 AM

i wish i were on my way to pick it up:( I am stuck at work until saturday…and i work 12hr shifts:(

View patron's profile

patron

13034 posts in 1993 days


#10 posted 11-22-2012 12:17 AM

i’ve had mine for about 15 years

love it

call the guy up
ask him to wait

those jointers with hand crank
can be a pain to move up and down

this one is super simple
loosen the lock lever
raise or lower the lever arm
tighten the lock lever

done

they do have a shelix spiral cutter for it now
that you can drop in
even with the cost of it
you are still below the new cost
of just the regular DJ20

i am still waiting to do that myself

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View shelly_b's profile

shelly_b

841 posts in 770 days


#11 posted 11-22-2012 12:42 PM

that was my thought, to upgrade to a shelix later. my only worry is that i won’t be able to see it run since it is in a storage shed…but i feel like even if the motor is broke, the machine itself is still not going to be a bad deal. surely i could find a cheap motor to put on an awesome machine lol. is there anything else i should check besides the beds for flatness and the bearings? many times when i buy from CL i later find out it wasn’t as great of a deal as i thought b/c i end up buying parts i did not know were missing. when i got my table saw i had to buy the miter guage and the wrench to change the blade. i have asked him to wait, and to let me know if someone else is interested and i will try to talk my parents into going to get it for me. as of now i am supposed to be there at 9am saturday. i have been looking for a good deal on a nice jointer for so long! i think i will cry if i lose this one lol

View shelly_b's profile

shelly_b

841 posts in 770 days


#12 posted 11-22-2012 12:47 PM

also, it almost seems like this guys owns the storage unit, or bought it(like on storage wars). he doesn’t make it sound like they are his tools. i haven’t asked yet, but do plan to. he has another post with the rest of the unit. all of it for $5,000. “Tools include Table saw , portable table saw , panel saw , wet tile saw , 60 gallon air compressor , shaper , jointer , 55 gallon industrial vacume , band saw , scrowl saw , planer”. and then this is at the bottom “All items are of GOOD USED CONDITION ( Unless other wise stated ) Seller will do best to accurately describe item of any defect. But please keep in mind USED items may have pre-existing fading, mild piling or air-bourne dander. All items should be washed before using. All Sales Sold As Is, No refunds, No partial refunds or exchanges. We buy our items at yard sales and auctions, so many times we may not know the history of the item”. now that i read it, they are obviously not his tools, but it seems like these are good tools and not put in the unit b/c they were broke. i sure would love to have that panel saw!! maybe when i hit the lottery lol

View dhazelton's profile

dhazelton

1185 posts in 949 days


#13 posted 11-22-2012 01:55 PM

“Mild Piling” sounds like how I store stuff in the garage. I think the guy must dispose of estates and such and that is just his boilerplate disclaimer for furniture and clothes. If all those tools are name brand quality five grand sounds like a deal. IF you have five grand and an empty shop space with at least a hundred amps to put it all in. Three phase stuff would start to add cost.

View shelly_b's profile

shelly_b

841 posts in 770 days


#14 posted 11-22-2012 09:56 PM

yeah i wish i could buy it all lol. i would LOVE a panel saw!

View mbs's profile

mbs

1437 posts in 1592 days


#15 posted 11-23-2012 04:56 AM

I have two of those and they are good. I put the Byrd Shelix in one of them and it works great.

-- Sorry the reply is so long. I didn't have time to write a short reply.

View MatthewG's profile

MatthewG

66 posts in 1431 days


#16 posted 11-23-2012 11:20 PM

This is a DJ-20, which is a parallelogram design. I have had a DJ-15 for about two years. I really like it. The tables stay level and straight all the time. I think that either dovetail or parallelogram designs, properly adjusted, work well. $800 seems reasonable, if the surfaces can be cleaned up and have no pitting.

-- Matthew, from beautiful Wisconsin USA

View AandCstyle's profile (online now)

AandCstyle

1316 posts in 909 days


#17 posted 11-26-2012 02:03 AM

Okay, we’ve all been waiting patiently. Did you buy it????? What was the condition?

-- Art

View shelly_b's profile

shelly_b

841 posts in 770 days


#18 posted 11-26-2012 12:39 PM

Yes i did:) i spent all weekend cleaning it up. I am goi.g to post a blog with pics. Thanks guys for all your help. I prob wouldnt have gotten it without your help! Your encouragment made me talk him into holdi.g it for me!

View AandCstyle's profile (online now)

AandCstyle

1316 posts in 909 days


#19 posted 11-26-2012 07:27 PM

Congratulations! You will love this machine.

-- Art

View shelly_b's profile

shelly_b

841 posts in 770 days


#20 posted 11-27-2012 12:20 AM

thanks:) i was/am very excited! i can’t wait to get a 220 wired up so i can try it out!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase