LumberJocks

All Replies on Mystery wood- again

  • Advertise with us
View drpdrp's profile

Mystery wood- again

by drpdrp
posted 660 days ago


17 replies so far

View TopamaxSurvivor's profile

TopamaxSurvivor

14721 posts in 2301 days


#1 posted 660 days ago

Looks like fir to me.

-- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Gshepherd's profile

Gshepherd

1465 posts in 827 days


#2 posted 660 days ago

second the Fir…..

-- What we do in life will Echo through Eternity........

View knotscott's profile

knotscott

5417 posts in 2001 days


#3 posted 660 days ago

I’ll third fir, but check with the dog to be sure….it gave a closer inspection that we can?

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Tennessee's profile

Tennessee

1447 posts in 1140 days


#4 posted 660 days ago

Either fir or possibly old growth yellow pine. Either way, it would look grand lightly sanded and sealed with a nice gloss floor poly. Just remember never to sand against the grain or you will have scratches forever.

-- Paul, Tennessee, http://www.tsunamiguitars.com

View Monte Pittman's profile

Monte Pittman

13735 posts in 964 days


#5 posted 660 days ago

I agree with the for. I also agree with Tennessee on the finish.

-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability

View Tedster's profile

Tedster

2270 posts in 837 days


#6 posted 660 days ago

Definitely fir.. will be beautiful if sanded and finished. It’s softer than other flooring woods, such as oak, so I wouldn’t recommend tap dancing or stiletto heels.

-- I support the 28th Amendment. http://www.wolf-pac.com/28th

View David Craig's profile

David Craig

2135 posts in 1734 days


#7 posted 660 days ago

Try to avoid prostitutes with a tap dancing fetish…

-- There is little that is simple when it comes to making a simple box.

View Swampy's profile

Swampy

38 posts in 970 days


#8 posted 660 days ago

LOL David. Something I guess we should all avoid.

-- Gary Vondermuehll

View Mark Smith's profile

Mark Smith

491 posts in 666 days


#9 posted 660 days ago

It’s probably tongue and groove fir like the others have said. Your profile doesn’t say what State you are in. This type of floor was common around where I am in California back in the 60’s and early 70’s. How is the weather where you are? I’m betting there is no insulation under that floor unless somebody has added it. I just did some work on a rental house my parents own that has the exact same floor. When we stripped out the carpet and some of the old underlayment you could actually feel wind coming up between those fir boards in places. I think the builder counted on putting wall to wall carpet over that floor and the carpet and pad acting at least as a little insulation. Just something to thing aboud.

-- Mark Smith, Tracy, CA., http://www.markscustomwoodcrafts.com

View WDHLT15's profile

WDHLT15

1093 posts in 1102 days


#10 posted 660 days ago

It could be white pine, too. I agree with fir or pine.

-- Danny Located in Perry, GA. Forester. Wood-Mizer LT15 Sawmill. Nyle L53 Dehumidification Kiln

View drpdrp's profile

drpdrp

150 posts in 671 days


#11 posted 659 days ago

Mark sir I think you are dead on.

1950, Gilroy CA. It is tongue and groove as well.

David- I will make no such commitment.

Tenn- I will test a section!

View Lee Barker's profile

Lee Barker

2163 posts in 1476 days


#12 posted 659 days ago

I’m concerned about what appears to be staining. As soft and absorbent as fir is, it might not sand out. Anybody add to that, or am I being too fussy?

Kindly,

Lee

-- "...in his brain, which is as dry as the remainder biscuit after a voyage, he hath strange places cramm'd with observation, the which he vents in mangled forms." --Shakespeare, "As You Like It"

View Tennessee's profile

Tennessee

1447 posts in 1140 days


#13 posted 659 days ago

Lee, some people think that adds character. But a water stain is a water stain, ugly and needs to go. If it is deep, possibly bleach it out. Darkening from rug edges is another bad one.

-- Paul, Tennessee, http://www.tsunamiguitars.com

View TopamaxSurvivor's profile

TopamaxSurvivor

14721 posts in 2301 days


#14 posted 659 days ago

I was surprised to see it being used for a finished floor, not just underlayment. I can’t imagine it giving any where near the service a hardwood floor would give.

-- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Dusty56's profile

Dusty56

11644 posts in 2314 days


#15 posted 659 days ago

Sure looks like Fir to me as well : )

-- I'm absolutely positive that I couldn't be more uncertain!

View drpdrp's profile

drpdrp

150 posts in 671 days


#16 posted 658 days ago

I won’t be in a position where I can appropriately pull back the carpet the rest of the way for a while. When I do- am I going to find a seam of boards 8 feet back from the wall or will they be staggered like “a hardwood floor”?

Good points on the stains. One thing I was wondering is could I (or is it recommended) to actually stain the wood before sealing it? If that is a normal thing- maybe the stain would cover the… uh… stain?

View Andy123's profile

Andy123

226 posts in 1100 days


#17 posted 658 days ago

Straight grained fir.

-- The mistakes I make in woodworking are not mistakes they just give my projects character- Me

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase