LumberJocks

All Replies on Just picked up a Delta DJ-20

  • Advertise with us
View BerBer5985's profile

Just picked up a Delta DJ-20

by BerBer5985
posted 661 days ago


16 replies so far

View patron's profile

patron

12957 posts in 1940 days


#1 posted 661 days ago

i have the same one
a real joy to use

you are in luck
for years they didn’t have a helix cutter for this
but in the last year they finally came out with one
(i still dream of one)

got myself a little toy 4” one too
for smaller pieces
the tables are closer together in it

great price
enjoy

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Gshepherd's profile

Gshepherd

1436 posts in 800 days


#2 posted 661 days ago

Congrats, that is one heck of a jointer, byrd shelix head you will love it…. I have one on my PM60 and it is great. Get a chip change a edge and move on….. A lot quieter as well…..

-- What we do in life will Echo through Eternity........

View JarodMorris's profile

JarodMorris

165 posts in 974 days


#3 posted 661 days ago

Are you sure that one isn’t too small for ya? Looks great.

-- Dad: Someone was supposed to pick up his toys! Son: My name isn't "Someone".

View Roger's profile

Roger

14114 posts in 1402 days


#4 posted 661 days ago

Wow! A very nice machine. You’ll luv it. I see that Ryobi planer in the background is the same one I have

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View toolie's profile

toolie

1717 posts in 1227 days


#5 posted 661 days ago

congrats on a gloatable buy. definately rates a “you suck”.

-- there's a solution to every problem.......you just have to be willing to find it.

View Surfside's profile

Surfside

3040 posts in 772 days


#6 posted 661 days ago

That’s a very nice catch!

-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"

View BerBer5985's profile

BerBer5985

420 posts in 1019 days


#7 posted 661 days ago

Curious if anyone knows about the wiring. I was going to put a new cord on and currently I have a nema 6-50p outlet that I had for a welder and I wanted to use that outlet to plug into, so I’m at lowes right now looking to put a 25’ cord wired into the machine, but is it standard 3 wire, white, black, green on this motor? Might be a dumb question but I didn’t look before I left. I was going to go with 10/3 or 12/3 wire. Is that correct?

-- Greg, Owner, Quality Carpet One, www.qualitycarpetonecrofton.com

View Charlie's profile

Charlie

1001 posts in 885 days


#8 posted 661 days ago

for a 25’ cord go with the 10/3

View BerBer5985's profile

BerBer5985

420 posts in 1019 days


#9 posted 661 days ago

Ok, perfect. I bought 25 feet of 10/3 wire and will hopefully have it all hooked up by tonight so I can get the blades changed out and set and tune it up, although I don’t believe it needs much. Should I be worried about the slight dip in both the infeed and outfeed tables? It’s just in the middle of both and it’s only .0035” on one and .002” on the other? It doesn’t sound like much to me, but with a straight edge, there’s slight light under each middle section. My old craftsman jointer had completely flat tables with absolutely no light. I’m sure with the delta being moved from different places over time and people picking up on the long end that it might have caused that to slightly get out of flat. Is it big enough to worry about?

Infeed:

Outfeed:

-- Greg, Owner, Quality Carpet One, www.qualitycarpetonecrofton.com

View cabmaker's profile

cabmaker

1282 posts in 1407 days


#10 posted 661 days ago

Greg, you stole that one. I guess you noticed that it is the invicta ! Premium for sure ! Nice grab.

View AJswoodshop's profile

AJswoodshop

1057 posts in 875 days


#11 posted 661 days ago

Nice job getting the jointer! That was a great deal, looks like it will be a nice machine. My jointer infeed, and outfeed tables aren’t flat either. I’m not sure if it’s a big deal, hopefully not because if it’s a big deal, you and I will be in trouble!

-- If I can do it.....so can you! -AJswoodshop

View BerBer5985's profile

BerBer5985

420 posts in 1019 days


#12 posted 661 days ago

I’m guessing as long as the they are coplanar on the 4 corners, it should be as good as it’s going to get. I’m going to double check it tonight and then change the blades with my OneWay guage which is the best tool ever for changing blades. When I save up a little more, I’m going to jump on the Byrd head. I already ordered the bearings to have for when i do. haha!

-- Greg, Owner, Quality Carpet One, www.qualitycarpetonecrofton.com

View skruft's profile

skruft

8 posts in 718 days


#13 posted 660 days ago

I have one of these and it’s excellent. I would just mention these things:

1. When I got mine years ago, the fence was warped and I had to ask for another one. It came right away with no discussion, so this must have been a known problem.

2. The only change I made in mine was to install a magnetic starter instead of the regular switch, so that the machine would not start by itself if the power failed and came back on. I think a quality jointer should have come with one but they don’t.

3. I don’t see the guard in your photos.

View BerBer5985's profile

BerBer5985

420 posts in 1019 days


#14 posted 660 days ago

I checked a few sites (http://www.happywoodworking.com/DJ20adjustments.html) and anything below .008” of in inch is within spec for that jointer in regards to table flatness. The largest gap I had between the straight edge and the largest gap in the either table was .0025” so we are more than good on that. That made me feel better. I haven’t checked the fence just yet, but it seemed pretty flat to me.

I spent a couple hours last night getting the tables back in order and coplanar to each other. The one end on the infeed table was higher on the furthest end from I’m sure where it’s been lifted to move, so I adjusted that using the methods on that website and I think I got it pretty good. We shall see, but it seemed that i was able to get it within less than .001” within coplanar which is good enough for me. I got my first new blade set this morning with the 15 minutes I had before work, and just two more to go.

Right now it has a 5” dust chute on it which is tough to find reducers for, so I think I’m going to take that off and bolt a 4” connection to it that came with dust collector starter kit.I also changed the current plug in wire on it to a 10/3 gauge wire and made it 25’ long so I can move to a different area of the garage without having to worry about the distance.

I do have the guard, I had just taken it off to do table adjustments and change the blades. All in all, I’m very pleased so far. I’m anxious to use it and see how it does once it’s all tuned up with new blades. It should be a world of difference from my 36” in total length 6” Wide 1/2 HP old craftsman jointer that I have. Served me well to get me started, but it was far from great.

-- Greg, Owner, Quality Carpet One, www.qualitycarpetonecrofton.com

View BerBer5985's profile

BerBer5985

420 posts in 1019 days


#15 posted 660 days ago

I also just purchased the Byrd head so I’ll install that as soon as it comes! I’m excited! Is installing the bearings something that Holbren will do for you? Does anyone know?

-- Greg, Owner, Quality Carpet One, www.qualitycarpetonecrofton.com

View pintodeluxe's profile

pintodeluxe

3270 posts in 1412 days


#16 posted 373 days ago

I just picked up one of these too. My tables were perfectly coplanar (even after being loaded into my trailer with a forklift!). On my first couple test passes, I felt a mild vibration in the workpiece. I checked the outfeed table height, and it was even with the cutterhead. I reset that distance to the recommended .015” spec. Then I put a set of fresh blades on it. Man, what a difference. Cuts smooth now.
I had to laugh yesterday, the infeed table is so long I could rest a 5’ board on it. That is a little easier than wrestling long boards over my old 6” jointer.

Did you ever get the Shelix head installed? You’ll have to do a review.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase