LumberJocks

All Replies on Fence upgrades for Craftsman Table Saw

  • Advertise with us
View JarodMorris's profile

Fence upgrades for Craftsman Table Saw

by JarodMorris
posted 07-18-2012 03:35 PM


16 replies so far

View Bill White's profile

Bill White

3496 posts in 2647 days


#1 posted 07-18-2012 03:39 PM

Is there an adjusting mechanism (set screws) that will tighten the fence? I pics of the fence grip area showing where it attaches to the rail would help.
Bill

-- bill@magraphics.us

View JarodMorris's profile

JarodMorris

165 posts in 1062 days


#2 posted 07-18-2012 03:49 PM

Bill, I’ll have to add those pictures tonight since I’m at work right now. I found the picture on craigslist since these types of table saws are very abundant on CL.

-- Dad: Someone was supposed to pick up his toys! Son: My name isn't "Someone".

View knotscott's profile

knotscott

5513 posts in 2062 days


#3 posted 07-18-2012 04:31 PM

The Delta T2 fence is an excellent bang for the buck and is a very good fence for your saw that’d need minimal modification to make fit…..many others have done it. It’s $158 shipped from Tool-plus.com. That fence and a decent new blade could make your saw feel better than new.



-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View JarodMorris's profile

JarodMorris

165 posts in 1062 days


#4 posted 07-18-2012 04:58 PM

Thanks KnotScott. I may just have to do that. That fence looks awesome. I’ll first see what I can do to adjust the one I have (deal or not, it is still $158 out of pocket).

As for the blades, I don’t need new blades. I’ve already got 2 Freud blades that I love to death. Both are thin kerf. One is flat top to be used with the woodgears.ca box joint jig build that I’m about to start on. I just finished a bathroom vanity and now I get to choose the next project!

-- Dad: Someone was supposed to pick up his toys! Son: My name isn't "Someone".

View Alexandre's profile

Alexandre

1417 posts in 877 days


#5 posted 07-18-2012 05:02 PM

That fence…. IS SPARTA
Its huge compared to the saw…

-- My terrible signature...

View oldretiredjim's profile

oldretiredjim

181 posts in 1072 days


#6 posted 07-18-2012 05:09 PM

Delta T2. I put one on a similar saw and it is in my blog. I had to drill both the front rail and the rear cast iron on the saw itself. You can free had the holes in the cast iron but I think that would be hard on the front rail. Mine came out great and I love it.

View Sirgreggins's profile

Sirgreggins

292 posts in 922 days


#7 posted 05-09-2013 01:38 AM

oldretiredjim, do you have a link to this blog post. I dont see it her on LJ. I just got a Craftsman flex drive for free for my uncle and am looking to upgrade the fence as well.

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1192 days


#8 posted 05-09-2013 01:43 AM

I have a Ridgid AC1036 fence on my saw….

I LOVE the fence BTW.

-- http://www.PictureTrail.com/gid6255915

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1192 days


#9 posted 05-09-2013 01:55 AM

And just my crazy two cents…if you put a Delta fence on it (great fence), take the Delta sticker off it! Looks very weird….no Ridgid sticker on my fence…LOL

-- http://www.PictureTrail.com/gid6255915

View MT_Stringer's profile

MT_Stringer

1980 posts in 1917 days


#10 posted 05-09-2013 03:34 AM

Vega Pro 40 is what I put on my 1977 Craftsman. It made a world of difference.
Got it here.
Hope this helps.
Mike

-- Handcrafted by Mike Henderson - Channelview, Texas

View spcbike's profile

spcbike

23 posts in 660 days


#11 posted 05-09-2013 10:58 AM

The Ridgid AC1036 must be discontinued as I don’t see it for sale anywhere.

View toolie's profile

toolie

1768 posts in 1315 days


#12 posted 05-09-2013 03:06 PM

The Ridgid AC1036 must be discontinued as I don’t see it for sale anywhere.

affirmative. here’s one i got for $20 from HD when they were clearanced:

too bad. really nice fence system and as accurate as the t2 i have on a cousin c-man saw.

-- there's a solution to every problem.......you just have to be willing to find it.

View dschlic1's profile

dschlic1

179 posts in 656 days


#13 posted 05-09-2013 06:32 PM

I have an old Craftsman saw 113 series. The stock fence on my saw has a “spring” underneath the head of the fence. The fence works like this. The head has two guides on the outside edge (closest to the operator). The fence rides an 1 1/4” angle rails, the vertical side facing the saw and pointed downward. The fence head has a small metal angle with a plastic part that rides on the inside edge of the 1 1/4” angle rail. The metal angle presses the fence head against the two guides on the outside of the fence head. In this manner the fence remains square to the saw when moved. If you fence has this spring, you might need to adjust it.

I can post some pictures of the arrangement tomorrow if you want. Also see if you can find a manual (online Sears has many) for your saw and look at how to adjust your fence.

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1192 days


#14 posted 05-10-2013 12:14 AM

....The Ridgid AC1036 was a clone of the Craftsman Exacta-Rip fence, both not made anymore…I love the AC fence. I’d look on Ebay for them.

BTW, I got mine for $50 and I thought it was a super deal…then toolie got one for $20….dayam…LOL

-- http://www.PictureTrail.com/gid6255915

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1192 days


#15 posted 05-16-2013 02:01 AM

View RibsBrisket4me's profile

RibsBrisket4me

1376 posts in 1192 days


#16 posted 05-16-2013 02:11 AM

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase