LumberJocks

All Replies on Curly Oak?

  • Advertise with us
View lumberjoe's profile

Curly Oak?

by lumberjoe
posted 05-31-2012 08:05 PM


19 replies so far

View chrisstef's profile

chrisstef

17637 posts in 3127 days


#1 posted 05-31-2012 08:10 PM

Cant say ive seen anything like it but looks cool to me!

-- Its not a crack, its a casting imperfection.

View lumberjoe's profile

lumberjoe

2899 posts in 2369 days


#2 posted 05-31-2012 08:16 PM

Another question, is this even oak? I was in the oak pile at the mill, and it smells like oak when I planed it, but I have never seen anything like it.

-- https://pinepointwoodworks.wordpress.com/

View JayT's profile

JayT

5824 posts in 2332 days


#3 posted 05-31-2012 08:22 PM

I can help on the identification. Just send the board to me, and once it has been positively identified, I will be forced to build something with it and never send it back. Sound like a deal?

It sure looks like oak, but I also can’t remember ever seeing any with a wavy/curly grain structure quite this defined. I’m sure you will come up with a project that this would be just the right piece to finish it off.

-- In matters of style, swim with the current; in matters of principle, stand like a rock. Thomas Jefferson

View PurpLev's profile

PurpLev

8540 posts in 3769 days


#4 posted 05-31-2012 08:30 PM

looks like red oak – nice grain pattern but like you said, it’s hard to match it with other boards, I would keep it until you find a perfect use for it where it can shine

-- ㊍ When in doubt - There is no doubt - Go the safer route.

View a1Jim's profile

a1Jim

117203 posts in 3698 days


#5 posted 05-31-2012 08:31 PM

Beautiful Board,I’d hold on to it until a special project comes to mind.

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View lumberjoe's profile

lumberjoe

2899 posts in 2369 days


#6 posted 05-31-2012 08:32 PM

I’d like to make a flybox out of this for my dad for fathers day, but I’d have to plane it down to a half inch (no band saw for resawing) it seems like a waste of wood turning a quarter of this into chips. I’ll just hang on to it until the right project comes along.

-- https://pinepointwoodworks.wordpress.com/

View chrisstef's profile

chrisstef

17637 posts in 3127 days


#7 posted 05-31-2012 08:32 PM

Ya know, i had the boys save me a piece of red oak handrail off a job we were doin and i could have sworn i saw some curly in it. Im gonna dig it out of the tool crib and plane it down tonight. Maybe they’re long lost brothers from the Curly family?

-- Its not a crack, its a casting imperfection.

View TrBlu's profile

TrBlu

386 posts in 2746 days


#8 posted 05-31-2012 08:39 PM

Any type of wood can have a curly effect. The curl is caused by an abnormal wave in the fibres.

I would go back to the lumber yard and search that stack again. If there is one board, there is more.

You must find a special project for that beauty. Set it aside, until a good idea comes to you.

-- The more I work with wood the more I recognize only God can make something as beautiful as a tree. I hope my humble attempts at this craft do justice by His masterpiece. -- Tim

View lumberjoe's profile

lumberjoe

2899 posts in 2369 days


#9 posted 05-31-2012 08:44 PM

I think I will. This board was not with the oak though. It was actually sitting on top of a huge pile of soft maple that just came out of the kiln. I grabbed it because I needed another board after tallying up what I had selected and realized I was a few BF short. It was the right size and saved me a trip upstairs where the oak is.

-- https://pinepointwoodworks.wordpress.com/

View Nomad62's profile

Nomad62

726 posts in 3079 days


#10 posted 05-31-2012 10:07 PM

I’ve sliced up bunches of “soft” maple, and that was what I thought it was when I saw the pic; but photos are sometimes hard to read. Maple will be flat and smooth, oak will have a texture to it, somewhat of a “pore” look. Compare the one to a known good oak sample to be sure. Either way it sounds like you got a good buy on it.

-- Power tools put us ahead of the monkeys

View lumberjoe's profile

lumberjoe

2899 posts in 2369 days


#11 posted 05-31-2012 10:37 PM

I’m sure it’s not maple, and about 99.9% sure it’s oak. It’s very wavy and the grain is really lose

-- https://pinepointwoodworks.wordpress.com/

View Dusty56's profile

Dusty56

11822 posts in 3809 days


#12 posted 05-31-2012 10:49 PM

It’s Curly Red Oak…I’ve seen and handled plenty of it over the years : )
I also have some that is still in the rough and is 14”wide…..saving it for something special .
I also had some White Oak with figure in it and some called it Tiger Stripe , others Curly , and another said it was Flamed. Take a peek and decide for yourself : )
http://lumberjocks.com/projects/49488

-- I'm absolutely positive that I couldn't be more uncertain!

View bondogaposis's profile

bondogaposis

4931 posts in 2472 days


#13 posted 06-01-2012 12:00 AM

I’ve seen that before, it is uncommon, but not rare. I’d save it for drawer fronts.

-- Bondo Gaposis

View chrisstef's profile

chrisstef

17637 posts in 3127 days


#14 posted 06-01-2012 12:08 AM

“Im Chris, this is my brother Curly, and a this is my other brother, Curly”. (Name that 80’s sitcom reference)

Joe if you didnt post this i may have never taken that “old handrail from the nursing home were demolishing” piece of 6/4 oak home. Thanks! Indeed curly oak does exist:


(no hijack intended)

-- Its not a crack, its a casting imperfection.

View LukieB's profile

LukieB

966 posts in 2451 days


#15 posted 06-01-2012 12:10 AM

I’ve seen this before as well, I have a pretty nice stash in the lumber shed. I used to work at a cabinet/millwork shop that did a disgusting amount of oak. And when I saw pieces like that…(kind of, not quite as pretty as that one) they found their way to the “scrap Pile”....and then my truck. Still not sure what to do with them. Can’t wait to see what you do with yours. Keep us posted.

-- Lucas, "Someday woodworks will be my real job, until then, there's this http://www.melbrownfarmsupply.com"

View WDHLT15's profile

WDHLT15

1766 posts in 2597 days


#16 posted 06-01-2012 01:35 AM

Looks like it could be ash. Does it have prominent medullary rays that you can easily see on the end grain? These rays are what create the fleck in quartersawn oak. If they are not easy to see with the naked eye, it is ash. I am not seeing the speckled pattern that you get with flaswawn oak, but then again, it might just be the resolution in the picture.

Check the end grain for prominent rays. Either way, it is very beautiful!

-- Danny Located in Perry, GA. Forester. Wood-Mizer LT40HD35 Sawmill. Nyle L53 Dehumidification Kiln. hamsleyhardwood.com

View pvwoodcrafts's profile

pvwoodcrafts

244 posts in 4042 days


#17 posted 06-01-2012 01:45 AM

Curly red oak, one of my favorites. I’ve done several kitchens using it for the door panels and drawer fronts. I just completed two sets of 3’ x 7’8” cathedral double entry doors with curly oak panels. Very nice to work with.

-- mike & judy western md. www. pvwoodcrafts.com pvwccf1@verizon.net

View lumberjoe's profile

lumberjoe

2899 posts in 2369 days


#18 posted 06-01-2012 12:53 PM

WDHLT15 – thanks for the tip. In comparing the side and end grain, it does have the prominent rays that are present in some other red oak I compared it to, so it is safe to say this is red oak.

Now this board goes back in the rack for the next couple of years while I increase my skill level enough not to ruin it

-- https://pinepointwoodworks.wordpress.com/

View WDHLT15's profile

WDHLT15

1766 posts in 2597 days


#19 posted 06-02-2012 02:37 AM

I could stand to have a whack of that, for sure. I love curly wood.

-- Danny Located in Perry, GA. Forester. Wood-Mizer LT40HD35 Sawmill. Nyle L53 Dehumidification Kiln. hamsleyhardwood.com

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com