LumberJocks

All Replies on MDF

  • Advertise with us
View MrRon's profile

MDF

by MrRon
posted 03-06-2012 09:16 PM


17 replies so far

View zer0bot's profile

zer0bot

9 posts in 1755 days


#1 posted 03-06-2012 09:25 PM

I used watered down wood glue and it worked well.

View Bill Davis's profile

Bill Davis

226 posts in 2679 days


#2 posted 03-06-2012 09:28 PM

I do not believe there is a reasonable way to ‘completely eliminate moisture’. Applied finishes will slow down the absorption/desorbtion of moisture but not eliminate it. Some are better than others and more coats adds to their ability to slow misture transfer.

View NBeener's profile

NBeener

4806 posts in 1929 days


#3 posted 03-06-2012 09:31 PM

Spar varnish ?

-- -- Neil

View Chipy's profile

Chipy

374 posts in 1348 days


#4 posted 03-06-2012 10:10 PM

Paste wax about 4 coats.
.

View DIYaholic's profile

DIYaholic

14708 posts in 1430 days


#5 posted 03-06-2012 10:16 PM

Hermetically seal it in a mayonaisse jar & place it under Funk & Wagnall’s doorstep!

I know the folks over at www.cnczone.com use watered down wood glue, when making their MDF CNC Routers!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View DS's profile

DS

2132 posts in 1175 days


#6 posted 03-06-2012 10:19 PM

Run it through the edgebander with pvc edgetape. Sealed, quick, easy, cheap.

-- "Hard work is not defined by the difficulty of the task as much as a person's desire to perform it.", DS251

View Fred Hargis's profile

Fred Hargis

2058 posts in 1248 days


#7 posted 03-06-2012 10:28 PM

I don’t believe any finish will completely eliminate moisture, although the thinned glue idea sounds like it has some promise.

-- Our village hasn't lost it's idiot, he was elected to congress.

View DWhitt's profile

DWhitt

12 posts in 2303 days


#8 posted 03-06-2012 10:33 PM

I know applying spackling on the edges will keep the edges from acting like sponges when applying paint.. Not sure about moisture though

View Trapshter's profile

Trapshter

62 posts in 1149 days


#9 posted 03-07-2012 12:03 AM

Use a water proof mdf (exteira) is the trade name .nice stuff .you can leave it outside unfinished .works well

-- Smile and wave boys just smile and wave

View joebloe's profile

joebloe

157 posts in 1049 days


#10 posted 03-07-2012 12:17 AM

I use water base poly,at least 3 coats.

View Viktor's profile

Viktor

448 posts in 2173 days


#11 posted 03-07-2012 12:24 AM

Epoxy, nothing else comes close. It is used in fabrication of wooden water tanks, bathtubs etc. There are kinds that impregnate the substrate and form water tight seal. Ask shipwright on this site or look up his blogs/posts. He is an expert on this and I recall he recommended a particular brand used in marine applications.

Found it: http://lumberjocks.com/topics/22534
see post #18

View kizerpea's profile

kizerpea

746 posts in 1122 days


#12 posted 03-07-2012 05:57 AM

I THINK ITS CALLED MDO…FOR OUT DOOR PROJECTS AN SIGNS…....AS FOR MDF..THROW IT IN THE YARD AN FORGET IT….I DONT EVEN LIKE IT IN MY SHOP

-- IF YOUR NOT MAKING DUST...YOU ARE COLLECTING IT! SOUTH CAROLINA.

View 559dustdesigns's profile

559dustdesigns

633 posts in 1922 days


#13 posted 03-07-2012 06:44 AM

I use Mdf all the time. Use Polyester resin (fiberglass resin), it will seal anything.

-- Aaron - central California "If you haven't got the time to do it right, when will you find the time to do it over?"

View woodluc's profile

woodluc

11 posts in 1084 days


#14 posted 03-07-2012 10:11 AM

What is the result you’re trying to acheive.
Is it going to be a table or a piece of painted furniture?
Or is it just a workbench (or similar) that needs a durable finish.

-- http://timberfurnitureplans.com/

View Bill White's profile

Bill White

3590 posts in 2715 days


#15 posted 03-07-2012 03:47 PM

I use Extira too. Heavy, strong, flat. Seal with shellac for a smooth finish.
Bill

-- bill@magraphics.us

View MrRon's profile

MrRon

2993 posts in 1998 days


#16 posted 03-07-2012 05:54 PM

“I THINK ITS CALLED MDO”. I’m familar with MDO, I’ve used it before, but it is very hard to come by in my area. Ifound a sign shop who will sell me a 4×8 sheet of it for $95 + tax.
“Use a water proof mdf (exteira) is the trade name .nice stuff”. I’ve also heard of exteria, but that is even more hard to find and I understand it is quite expensive. I can find all kinds of materials I can use from the internet, but no one locally can provide it. It seems that only industry is privy to good materials. Unless I can commit to 1000 sheet orders, I’m SOL

View Mainiac Matt 's profile

Mainiac Matt

4497 posts in 1083 days


#17 posted 03-07-2012 06:34 PM

The MDO I’ve used before is a good quality plywood (7 veneer layers for 3/4” panels) with a paper thin layer of phenolic on both faces. It comes and stays dead flat.

We ran some jobs at work out of it a long time ago and have had a short stack in our oddball plywood pile ever since. Unfortunately, that pile hasn’t been stacked properly and the panels are now slightly warped.

If I recall, it cost us in the mid sixties per sheet, but then again, we purchase trailer load quantities of CDX plywood, so when we need something special or odd, we get good pricing.

-- Pine is fine, but Oak's no joke!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase