All Replies on Hubby's Christmas Present - Any ideas what it is ...

looks like ‘thumbnail’ plane

for making round edges to boards

i bet some hand plane guys
could tell you more

hang on
they will be along shortly

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

Hmm..
I’m thinking a cooper’s tool, like in making barells, or a wheelwright’s device, making wheels for stagecoaches etc ?

-- Glen, Vernon B.C. Canada

Oooh, I like the idea of a wheelwright’s device for stagecoaches; what a romantic image that conjures up.

We’re working on it over in the handplane thread! My first guess is for spindle work or barrel staves. I’ve seen similar ones in cooper’s shops to shape the bungs on wine barrels, etc. The radius is a bit odd, though. I’m sure you’ll have an answer in no time. It sure is a handsome tool!

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

for stair tread noses ?

the radius looks to sharp for barrel stave’s

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

I’d bet a self made plane for making some kind of pole, maybe boat builders. It looks to big for stage coat wheels, but the frame where the horses were attached may have been round.

-- There is nothing like the sound of a well tuned hand plane. - http://timetestedtools.wordpress.com (timetestedtools at hotmail dot c0m)

Looks about the right size for Model T or Model A wheel spokes.

-- David in Damascus, MD

There is no real way to tell exactly beyond it being for rounding. Whether for spars on a boat, spokes on wheels, hoe handles, oxen yokes, or whatnot. Many times, they are just called rounders.

Whoever made it, they did a great job. Good choice for a present. I guarantee you will probably never see another one like it in your lifetime. I can’t imagine any plane collector not being tickled to death with it.

-- Woodworking shouldn't cost a fortune: http://lowbudgetwoodworker.blogspot.com/

Margot – What’s the wording on the wedge say. I can’t quite make it out. It may shed some light on who the tool maker was.

deffently a big spoke-shave and very well done I must say … :-)

I have here the explanation to what it is
and its written in John M. Whelans book with the title the plane book … its history , form and function
site 302 …. I´ll bett your husband have it on his shelfs .. :-)

they are called plane – type- shaves and have a bench type throat and plane blade held by a wedge
in the same manner as used in bench planes . they are in fact , planes with a short stock and long side handles .
the general shape is that of spoke-shape, but are more agressive with a larger stock to accomodate the
blade mounting.
the two common types are the wheelsrights´s NELSON and the JARVIS both usualy have brassplated soles.
since the iron is parallel to the grain of the stock, the trust of the wedge tends to split it, and the stocks are sometimes straped with brass on the top to resist this both of these tools may be equipped with cap-irons.
the NELSON has flat or slightly compassed sole and the Jarvis a hollow one.

so this is a wheelrights JARVIS you have been lucky to find …. a vey fine gift …. enjoy his face
when he open and see it :-)

take care
Dennis

Dennis to the rescue – good job!

-- David in Damascus, MD

Broglea, the wording on it is I think perhaps the name of a previous owner, R Stirman.

Dennis, you’re brilliant – my husband will be so impressed with my knowledge! Don’t worry, I will confess eventually where I got the info from and I’ll pass my Lumberjocks account onto him. Thank you again – that’s really made my day.

you are welcome Margot to throw in other goddies
it was a pleassure to see this tool instead of a drawing of it :-)

take care
Dennis

http://hyperkitten.com/blog/?cat=3
Margot, this guy is a specialist in old stuff (not husbands). I’m sure that he would like to see the pic, and will give you another evaluation.
Dennis is correct as well.
Bill

-- bill@magraphics.us

Thanks Bill, I have just sent the photos through to Joshua.

It looks too big for spokes and too small for barrels (to me). The width and radius put it in the realm of being for the radiused fingerboard of a standup bass guitar. Lee Barker might know.

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

I know exactly what it is.
When I was little, I asked my older brother what kind of plant it was we were playing with.
He, having attained the lofty age of 10 imparted to me the information that the plant was most certainly a ‘Damifino’ plant and that it would make me sick if I ate the berries.
Me, being 6 was thrilled that he even chose to speak to me, took his information as gospel.

So… the next morning on my oatmeal were all these berries. round and blue in color. I immediately started crying and when mom asked me why, I told her that they were ‘damifino’ berries and they were poisonous.

She looked startled, and asked where I heard that and I told her… she gave my brother a whippin’ for swearing.

For ever after, anytime we didn’t know what something was we called it a damifino, even my mom and dad did it. So there’s your definitive answer ~ it’s a Damifino!

-- Improvise.... Adapt...... Overcome!

Something similar on eBay.co.uk, but not as nice as yours.

http://www.ebay.co.uk/itm/COACHMAKERS-LARGE-CURVED-SPOKESHAVE-BRASS-MOUTH-/140649866826?pt=UK_Collectable_ToolsHasdware_RL&hash=item20bf62a64a

-- Andy -- Old Chinese proverb say: If you think something can't be done, don't interrupt man who is doing it.

And another one…

http://www.ebay.co.uk/itm/ANTIQUE-COACH-MAKERS-PLANE-WHEELWRIGHTS-JARVIS-JAMES-HOWARTH-/160688561699?pt=UK_Collectable_ToolsHasdware_RL&hash=item2569c8de23

-- Andy -- Old Chinese proverb say: If you think something can't be done, don't interrupt man who is doing it.