All Replies on Building TS stand and outfeed!?!??!?

  • Advertise with us
View doubleG469's profile

Building TS stand and outfeed!?!??!?

by doubleG469
posted 12-05-2017 02:19 PM

9 replies so far

View Ripper70's profile


1130 posts in 1052 days

#1 posted 12-05-2017 02:36 PM

Sent you a PM.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View GR8HUNTER's profile


4713 posts in 856 days

#2 posted 12-05-2017 02:51 PM

maybe 1 of these great guys with SU could help you out Gary :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View doubleG469's profile


645 posts in 588 days

#3 posted 12-05-2017 03:25 PM

maybe 1 of these great guys with SU could help you out Gary :<))


You think I would have learned how to use Sketchup but I must be getting grumpy old man syndrome. I have no desire to learn another software program.

Ripper – thank you

-- Gary, Texas

View rbrjr1's profile


170 posts in 349 days

#4 posted 12-05-2017 10:00 PM

I’m designing one now.. I’ve changed it a couple times since I started, I’ll post a photo of my “sketches” (I have downloaded sketchup but never used it)..

-- only an idiot dismisses an intelligent statement because they dont know anything about the person delivering it.

View AAL's profile


75 posts in 1569 days

#5 posted 12-05-2017 10:05 PM

I don’t know if this will help you or not, but coincidently I just posted a TS extension that I just completed. It’s different, but functional & sturdy. Perhaps the concept will help.

-- "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

View woodbutcherbynight's profile


5559 posts in 2552 days

#6 posted 12-06-2017 04:00 AM

By no means am I an expert but here are a couple of things I took into consideration on my own current TS build. Overall size LxWxH. Once I got that down by measuring both tablesaws I went with a list of all the accessories that went with them and worked out where they went. Then on to jigs, router bits for the attached router table. (A possible upgrade to consider for yours?) Finally with all that sorted out I looked at what space was left and figured out what power tools would fit in the leftover space. As my cabinet is 68 inches by 42 inches I went with a 1 1/2 inch angle iron frame and attached mobile base hardware with upgraded casters that hold 300lb each. Probably overkill but as Bearpaw will tell you that would be normal.

I know dust collection is a big deal but the collection on my saw is fair at best. The actual saw cabinet (contractors saw) has a 10 inch square hole at the bottom. Years ago my Dad bought a bag to go under the saw that he never actually used. For mine to deal with clean out I put a drawer under that and empty as needed. With two saws this required two such drawers.

Sorry all I have for pictures is the carcass standing on its end on dollies so I can work on it in the shop. Finished product is probably 3-4 months away.

-- Live to tell the stories, they sound better that way.

View PlanBWoodworks's profile


150 posts in 625 days

#7 posted 12-06-2017 08:23 AM

I have the same saw, and this is my set up. Let me know if you need specifics.

-- Why can’t I ever find my pencil???

View Firewood's profile


469 posts in 1777 days

#8 posted 12-06-2017 12:12 PM

Wood Magazine had a plan for one as part of their Idea Shop #5. Here is a link to it.

-- Mike - Waukesha, WI

View doubleG469's profile


645 posts in 588 days

#9 posted 12-06-2017 01:50 PM

Thank you gentlemen, there are some good suggestions here. I will probably wind up using a bit from each of your suggestions.

I do like the idea of adding my router table to use the same outfeed.

-- Gary, Texas

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics