LumberJocks

All Replies on NOVA 1624/44 belt replacement

  • Advertise with us
View ginasdad's profile

NOVA 1624/44 belt replacement

by ginasdad
posted 11-30-2017 03:03 AM


5 replies so far

View LeeMills's profile

LeeMills

601 posts in 1448 days


#1 posted 11-30-2017 04:40 PM

I replaced mine one time and it was no big deal. I had to remove the handwheel and two or three screws in the outside panel and was able to slip the new on without moving the pulley(s).
On wear, (unless they have changed) they spec a six rib microbelt. The last groove as you move up the pulley is not a full groove but a half groove so if you place the belt there it will rub. You can get a five rib instead or you can just leave one rib in the air which is what I did.

-- We cannot solve our problems with the same thinking we used when we created them. Albert Einstein

View David Smith's profile

David Smith

43 posts in 658 days


#2 posted 12-10-2017 11:36 AM

Wish I had read your post a few days ago. I just bought a belt ‘on sale’ at Woodcraft for $14.

-- David

View Jimnl's profile

Jimnl

89 posts in 2947 days


#3 posted 12-31-2017 03:20 AM

Ginasdad, which belt is it?

-- to turn or not to turn, is that really a question?

View iskoglan's profile

iskoglan

1 post in 93 days


#4 posted 07-19-2018 07:25 PM

For those interested – I just spent 1/2 hour on the phone with Mac at https://www.vbeltguys.com (1-800-213-9715) and ordered 4 belts for $15.71 with shipping. I don’t have it yet and, as a result, am not 100% sure it fits. I’ll repost after it gets here. The part number they stock as is 230J6 – D & D POWER DRIVE Replacement Serpentine Poly V Belt.

View LeeMills's profile

LeeMills

601 posts in 1448 days


#5 posted 07-20-2018 06:14 AM

Good price on the belts, I think I paid about the same but it has been quite a few years.
As to parts… Nova part number is 6PJ584. 6 is still the number or ribs and I guess PJ is microgroove; the 584 is length in millimeters.
In the U.S. the PJ is just J, 6 is still the number of ribs, and 230 is the length or 23 inches.
About any place will use one (or both) of the numbers for the same belt and it makes no difference in make such as Gates, A&I, etc.

IIRC most of the makers manufacture the belts with 220 ribs and the seller just slices off the number of ribs you want. Although you can use 5 rib as well or better, when I ordered they wanted more for five rib than six rib. Using the six rib can cause the one inside rib to rub and wear/fray and you think you need a new belt when you just need to not use the groove on the inside.

-- We cannot solve our problems with the same thinking we used when we created them. Albert Einstein

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com