LumberJocks

All Replies on Modern Square Legs for Desk Stability Question

  • Advertise with us
View Aric's profile

Modern Square Legs for Desk Stability Question

by Aric
posted 10-24-2017 07:17 AM


11 replies so far

View Craftsman on the lake's profile

Craftsman on the lake

2790 posts in 3435 days


#1 posted 10-24-2017 09:21 AM

Your description of the build looks sound. If the legs are solidly attached to the top I can’t see that they’d move at all.

-- The smell of wood, coffee in the cup, the wife let's me do my thing, the lake is peaceful.

View Woodknack's profile

Woodknack

11624 posts in 2377 days


#2 posted 10-24-2017 04:32 PM

It’ll be fine if built from steel. Built from wood it might feel sturdy at first, assuming good joinery, but it won’t hold up and within a year or two it will be wobbly. Wood joinery just isn’t rigid enough for that design.

-- Rick M, http://thewoodknack.blogspot.com/

View TheFridge's profile

TheFridge

9458 posts in 1483 days


#3 posted 10-24-2017 04:36 PM

It might have a chance if you box jointed everything.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View RRBOU's profile

RRBOU

176 posts in 2289 days


#4 posted 10-24-2017 05:38 PM

It looks like you are incorporating a cross piece between the legs. This will defiantly degrade the stability.

-- If guns cause crime all of mine are defective Randy

View Aric's profile

Aric

11 posts in 341 days


#5 posted 10-24-2017 05:49 PM

Hmm… I can’t use steel and I was really hoping to keep the design as close to that as possible. What if I were to increase the thickness to 1 1/4 inches and used 3 dowels?

RRBOU, which cross piece would be reducing stability? The top or the bottom? Why would that be the case?

Thank you all for your help!

View Aric's profile

Aric

11 posts in 341 days


#6 posted 10-24-2017 05:51 PM

Also, which direction of instability should I be concerned with? I was thinking it would be less secure from a forward to backward movement rather than from left to right.

View jonah's profile

jonah

1700 posts in 3296 days


#7 posted 10-24-2017 06:18 PM

It will rack like crazy left to right. You need some kind of a stretcher or at least an apron to prevent left to right racking.

View Snipes's profile

Snipes

177 posts in 2242 days


#8 posted 10-24-2017 07:14 PM

I agree with others, needs a diagonal brace.

-- if it is to be it is up to me

View Craftsman on the lake's profile

Craftsman on the lake

2790 posts in 3435 days


#9 posted 10-24-2017 07:58 PM

It will hold, but if you’re unsure, instead of using dowels, use very long screws and then put dowel looking plugs over them. The top, if screwed and glued will never loosen from the legs.

-- The smell of wood, coffee in the cup, the wife let's me do my thing, the lake is peaceful.

View Loren's profile

Loren

10385 posts in 3645 days


#10 posted 10-24-2017 08:28 PM

I am pessimistic. At least make a plan to add
some triangular gussets later if necessary.

A general design called a “parsons table” has
been successful in wood. Worth a look for
ideas of what works.

View Lazyman's profile

Lazyman

1958 posts in 1385 days


#11 posted 10-24-2017 09:38 PM

I agree with others that the square box legs are not the strongest approach. The will tend to rack if you put lateral force without some sort of bracing. You can test this by simply making a box with without top and bottom and sit on it. Id you shift your weight will sitting, you will probably end up on the floor.

Another problem I see with that design is that if the floor isn’t perfectly flat the board on the bottom may rock like a seesaw. Generally not a problem on newer homes but not uncommon on older homes with wood floors. You may find you need to put some pads on the bottom so that it only makes contact with the floor on the 4 corners.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com