LumberJocks

All Replies on Any Hand Plane Fettlers out Arizona way?

  • Advertise with us
View Dwain's profile

Any Hand Plane Fettlers out Arizona way?

by Dwain
posted 10-15-2017 12:41 AM


7 replies so far

View Tim's profile

Tim

3812 posts in 2110 days


#1 posted 10-15-2017 06:34 PM

Short of someone seeing this from your area, the only other options I can think of are if there is a woodcraft or rocker near by, some locations have had classes on hand plane tuning. Or you could contact local woodworking guilds or groups to try to locate someone.

Also you can try sending your plane to someone that’s good at fettling, they can look at it and tell you what would need to be done.

Last, there are two good resources i’ve used, DonW’s timetestedtools website has good articles on tuning hand planes and there used to be a free version of the article Hand plane rehab by Joe Hurst-Wajszczuk, but now I can’t find one. I see you can buy the back issue though. It has a lot of good fine tuning tips.

View KelleyCrafts's profile

KelleyCrafts

3189 posts in 888 days


#2 posted 10-15-2017 07:10 PM

Dwain, when we meet up to mill the mesquite you want done we can look at your Stanley while you’re here. I don’t have any old planes anymore because I started building my own woodys but I have fettled many that were over 100 years old that wanted to get back to work.

-- Dave - http://kelleycrafts.com/ - pen blanks - knife scales - turning tools

View onoitsmatt's profile

onoitsmatt

395 posts in 1325 days


#3 posted 10-16-2017 01:39 AM

Hi Dwain, I’m no expert, but get my own planes going. Happy to help if you are up my way. Also, the Rockler up this way periodically has hand-plane classes taught by David Flemming who is a really awesome local cabinetmaker/hand tool guru. Also check out the Southwest School of Woodworking for classes they offer. David also does classes in his shop or you can have private tutorials with him if you want. His rates are very reasonable and he’s a really cool guy.

-- Matt - Phoenix, AZ

View Dwain's profile

Dwain

572 posts in 4008 days


#4 posted 10-16-2017 03:16 AM

Man,

I love LumberJocks. Thanks for your offers of help guys! I will be looking up David, and reaching out. I’d love to get into a Rockler class too if David’s classes are a little to pricey for me. Still thanks to both of you!

-- When you earnestly believe you can compensate for a lack of skill by doubling your efforts, there is no end to what you CAN'T do

View Bluenote38's profile

Bluenote38

384 posts in 537 days


#5 posted 10-17-2017 01:48 AM

I almost hate to ask but how are you using “fettling”?? I’m familiar with it in green ceramics and in production of green powder metal parts to clean up the mold lines before firing.

-- Bill - Rochester MI

View onoitsmatt's profile

onoitsmatt

395 posts in 1325 days


#6 posted 10-17-2017 02:45 AM

Bill, it just means getting the plane set up, tuned and taking shavings the way it should. Just getting it dialed in. You typically see it in reference to planes, spoke shaves and other tools. Typically when you’re setting up a tool for use, you’d say you are going to hone and fettle it.

-- Matt - Phoenix, AZ

View WayneC's profile

WayneC

13775 posts in 4246 days


#7 posted 10-17-2017 03:33 PM

Have you seen this video?

-- We must guard our enthusiasm as we would our life - James Krenov

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com