LumberJocks

All Replies on Which jointer?

  • Advertise with us
View emkim's profile

Which jointer?

by emkim
posted 09-29-2017 09:20 PM


9 replies so far

View Loren's profile

Loren

10373 posts in 3642 days


#1 posted 09-29-2017 09:30 PM

The one with the open base has a mobile
base. The other one doesn’t. A cabinet
base can be nice to have but doesn’t serve
any real function. They both have chip
chutes.

Prices for used woodworking machines vary
a lot regionally and according to seller
motivation. I you need a jointer to grow
your abilities I wouldn’t argue with that
$220 6” machine is at all overpriced. Sure,
you can find one cheaper sooner or later,
but if you’re more interested in making
things than in machinery just get one.

View bk3132's profile

bk3132

11 posts in 234 days


#2 posted 09-29-2017 09:40 PM

What is the length of the infeed and outfeed tables on each unit? Just know that it’s much harder to process long stock on a short jointer. If you work with 30ish” and shorter stock, though, shouldn’t be an issue. Make sure you can find replacement knives pretty easily.

I’ve used the $600 Ridgid jointer extensively. It’s a good unit if you wanted to spend more…a little bigger than those pictured I think (although I am not sure).

Having a jointer is much better than not having one. But they are finicky, and it can be frustrating to get tables aligned, knives aligned etc—especially on the cheaper units. Watch lots of YouTubes. I’ve also fumbled my way through jointer jigs for the table saw. They work in a pinch, but they’ve been hit or miss for me. Or maybe I suck at making jigs…

View MrUnix's profile

MrUnix

6698 posts in 2193 days


#3 posted 09-29-2017 09:47 PM

Basically the same jointers… take your pick of which ever one is in better condition. Those didn’t change much in design for decades.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Andre's profile

Andre

1827 posts in 1800 days


#4 posted 09-30-2017 06:42 AM

Both good jointers, blade can be picked up easily, good for starting out and learning setup. Word of caution as you progress 6” jointer will be leave you wanting bigger! Then there is the option of helical head carbide cutters? Get the biggest and best you can afford to prevent having to upgrade to often or too soon.

-- Lifting one end of the plank.

View knotscott's profile

knotscott

8006 posts in 3369 days


#5 posted 09-30-2017 11:30 AM

If both are in comparable condition, I’d go with the X. The X has a beefier fence support, and has more mass due the enclosure.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View knotscott's profile

knotscott

8006 posts in 3369 days


#6 posted 09-30-2017 02:27 PM

p.s.: Almost forgot…there’s a 1/4hp difference between the motors too. 3/4hp for the open stand version vs 1hp for the X.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View jonah's profile

jonah

1695 posts in 3292 days


#7 posted 09-30-2017 02:39 PM

The closed base does help to control the shavings spread, at the cost of having to clean it out periodically. I prefer a cabinet base to an open base, personally. There’s a bit more stiffness there too.

View ChipSawdust's profile

ChipSawdust

17 posts in 249 days


#8 posted 09-30-2017 08:13 PM

Another vote for the X

View firefighterontheside's profile

firefighterontheside

18149 posts in 1850 days


#9 posted 09-30-2017 08:21 PM

I’m with these fellas.

-- Bill M. "People change, walnut doesn't" by Gene.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com