Reply by ScottM1

  • Advertise with us

Posted on Sawhorse ideas

View ScottM1's profile


132 posts in 1760 days

#1 posted 09-27-2014 09:31 AM

Personally I have never cut CDX on the router. I would contact my tooling supplier to see what they recommend for the cutter. I defiantly would not try a ¼ cutter unless I had a dozen or so on hand. I would think that the Glues that are used to manufacture this stuff are a lot harder on the cutters than a cabinet or furniture grade Plywood. Also from what I have seen in the lumber stores this stuff does not lay very flat so you may have to come up with a system to assist in holding it down. Here is a link to a similar subject.

-- Scott Marshburn,, FaceBook,, Twitter,

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics