LumberJocks Woodworking Forum banner

bandsaw box

2K views 9 replies 6 participants last post by  gfadvm 
#1 · (Edited by Moderator)
I posted a few days ago about my cl gloat of a 14in hf bandsaw I picked up for $40. Got around to my first project today. My wife and I's first anniversary is coming up so I decided to make her a heart shaped bandsaw box with ring holder. I am very pleased with the results so far. What do you guys think? Still got a few more coats of finish but reallllllly loving the walnut it has earned its spot as my new favorite wood.

Leg Drum Wood Musical instrument Flooring


Wood Rectangle Wood stain Hardwood Varnish
 

Attachments

See less See more
4
#6 ·
thanks, its walnut maple and red oak, and I had to build the drawer out of a piece of oak also since my new dust collector decided to shred the original drawer when the drum sander on the drill press bound and knocked it out of my hand
 
#9 ·
Thats what I posted about the dust collector I had the original drawer on the drill press with the drum sander sanding away and had the dc hose witting at the edge sucking up the dust when it bound on the drum and knocked it out of my hand before I knew it it went thru the impellar on the dc and turned it into splinters minus these 3 pieces. So I made a new drawer out of a piece of oak I had sitting around.
Wood Road surface Floor Flooring Rectangle
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top