LumberJocks Woodworking Forum banner

Jet 250s supersaw left side table

3K views 9 replies 3 participants last post by  theoriginaltree 
#1 · (Edited by Moderator)
Hello everyone

Hopefully I have posted this in the right place following the guides!!

I am in the UK and looking for a left side extension table (with a mitre slot) for my Jet 250s / supersaw. Does anyone know if these are still available in the USA?

It seems these are no longer available in the UK and I would like one as I dont get on with the sliding table. I'd like to use a cross cut sled again.

Heres hoping!!

Regards
Paul
 
#2 · (Edited by Moderator)
Hello everyone

Hopefully I have posted this in the right place following the guides!!

I am in the UK and looking for a left side extension table (with a mitre slot) for my Jet 250s / supersaw. Does anyone know if these are still available in the USA?

It seems these are no longer available in the UK and I would like one as I dont get on with the sliding table. I d like to use a cross cut sled again.

Heres hoping!!

Regards
Paul

- theoriginaltree
Could you pull some replacement part numbers from your manual. I can check their system with that if you have not already tried it.

I am not optimistic. I think they stopped making them in mid 2000.
 
#4 · (Edited by Moderator)
Hi Brad
Many thanks for replying.
I have a few different part numbers:
The Jet part number for the saw is 708781KM.
There is also a code of 200398 in my manual for the left wing with the mitre slot.
I also have a code of: Jet000311, but I think this is a UK code.
Many thanks!

- theoriginaltree
Not much luck. The only hit I got was not even close. I tried.

JSJ214C-000311 ACTUATOR $2.95 Limited Quantity

You searched for the Part Number: 200398

Parts

There are 0 parts available online that match your search.

Here is what it is called here in the states.

Extension Wing w/Miter Slot-L
Part Number: 200398
Jet
Availability: Discontinued
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top