LumberJocks

Reply by RogerM

  • Advertise with us

Posted on Crown Moulding Uneven Ceiling

View RogerM's profile

RogerM

461 posts in 1151 days


#1 posted 07-04-2014 02:56 PM

A backer piece is always a good idea except for the smaller crown molding (say under 2 inches). Crown molding was designed to make the transition between uneven ceilings and walls look nice. That is the reason it is always installed at an angle to both surfaces. The more uneven your surfaces the better to use smaller and thinner crown molding. Only experience will dictate how thin or how wide. Fortunately, caulking was developed to handle most imperfections between the molding and the surfaces. The point then becomes, how much caulking is acceptable to you. Almost all people I know use caulking for dealing with the imperfections (cracks) between the crown molding and the walls and ceilings. Good lucK! Hope this helps

-- Roger M, Aiken, SC


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase