LumberJocks

Reply by MT_Stringer

  • Advertise with us

Posted on Using regular Kreg jig like Kreg HD jig

View MT_Stringer's profile

MT_Stringer

3174 posts in 3377 days


#1 posted 05-05-2014 09:45 PM

Make a test piece. Take the guide part and clamp it to the edge of a 2×4 or what ever is about the same thickness as your project. My thinking is if you clamp the block up from the bottom of the board at the correct angle, you should be able to drill the hole…if not all the way through, at least part of the way.

Since I haven’t done it, I too would be interested to see what you come up with.
Good luck.

-- Handcrafted by Mike Henderson - Channelview, Texas


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com