LumberJocks

Reply by InstantSiv

  • Advertise with us

Posted on Cutting a circle SHOULDNT be this hard.

View InstantSiv's profile

InstantSiv

259 posts in 1434 days


#1 posted 04-28-2014 04:35 AM

I’ve used a trim router to cut circles successfully. I took 1/8th to a 1/4 on each pass. I used a circle jig which is really easy to make. Cut the outside first and then cut the inside. Be careful at the very end because there is nothing supporting the inner circle once it’s cut free from the outer circle. The router is attached to the inner circle so it can gouge into the outer circle if you don’t pay attention to it.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com