LumberJocks

Reply by dgerman

  • Advertise with us

Posted on Table Saw Blade to Miter Gauge Alignment when at 45 Degrees...

View dgerman's profile

dgerman

4 posts in 3057 days


#1 posted 05-11-2009 04:18 AM

Graham,
If I understand what you’re describing,with the blade tilted to 45 and measuring alignment to the miter slot with the a-line-it, your blade is off by 0.010”. My SC 35920 also has this problem and the research has led me to believe that by shimming a corner of the table it will bring this measurement closer to 0. I have not tried it yet as all of my miters or bevel cuts have mated well. I recommend trying some 45 deg cuts and seeing if it is a problem for you. There is a post at another woodworking website that may be of help, but you have to be a member to view the pics. Hope this helps. http://www.sawmillcreek.org/showthread.php?t=111878


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com