LumberJocks

Reply by ajthomas5009

  • Advertise with us

Posted on Spray painting a hand plane

View ajthomas5009's profile

ajthomas5009

296 posts in 1451 days


#1 posted 04-12-2014 03:16 AM

Well I ended up sticking with the multiple light coat method, 6 to be exact. I have the worst trouble with sagging and drips when ever I try to spray any thicker. By the time I was done spraying the paint was thick enough to mask the casting bumps on the flat surfaces. It seemed to turn out well so far but I won’t really know until tomorrow.

I know a week is the suggested curing time so I’m assuming that applies to reassembly and use, or just use? Also how long should I wait to unmask the machined surfaces?

-- Sometimes you're flush and sometimes you're bust, and when you're up, it's never as good as it seems, and when you're down, you never think you'll be up again, but life goes on.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com