Reply by realcowtown_eric

  • Advertise with us

Posted on Box / finger joints

View realcowtown_eric's profile


617 posts in 2081 days

#1 posted 03-30-2014 04:22 AM

If yer curious and sincere about box joint jigs you gotta check out this…'

I saw this , had to build iteration 1, and although I had to figure out a few things, got it built, used it.

Totally freaking marvellous.

Invest the time expense to fabricate, learn a few skills along the way.

Yer talking about 1/10th of an inch discrepancey, Mattias is tallking about 24ths of an inch on a rotary dial, so if you can put the handle in approximately the same position, yer talking about 3 or 4 360ths of 1/24th of an inch, and when you do the math, that works out to about 5/10kths of an inch….

Go there, scope it out. The fella is amazaing.

Eric in Calgary

-- Real_cowtown_eric

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics