Rather than hijack another thread, I wanted to know what grit I should sand a paint-grade poplar project to. I'm working on a step stool and I am at the point where I want to sand prior to assembly. What grit should I sand to? In the past I've always done 80 → 120 → 220.
Might want to start sanding Poplar with 120 or 150 grit sandpaper and finish with 180 grit before applying paint.
Would not think about sanding Poplar with 80 or 100 grit sandpaper unless surface really rough or lot of tool marks. Poplar is a hardwood, but very soft you can really create more work for yourself sanding with too coarse grit sandpaper.
Thanks everyone, I just wanted to verify my routine. I'll probably try starting with 120 and see if I need to step down to 80. I also have a lot of 220 paper so it will probably be my final grit.
If you want it real smooth take it to somewhere around 150 and then slap a coat of primer on it and sand that back from 150, 200 through 320, and 400. Maybe repeat or at least put another coat of primer on (generally the paint still looks better imho if the primer is knocked back flat at least)
This looks nice for gloss paint, expecially on more porous wood.
+1 to recommendations to go light. Don't sand too smooth on a prime paint job. With poplar especially you need a rough enough surface for the primer. You can sand poplar to a point it won't take adhesion. I echo rum sand rough and then prime, sand your course after that.
hmm, interesting thoughts. I should better clarify the project. This will be a child's step stool assembled with glue and screws. The primer I will be using is Zinsser 123.
So it sounds like my game plan will be to…
Sand with 120 grit until the surface is flat enough
Thanks everyone for the advice. Seems like there are several schools of thought on the grit to sand to. With most saying sand to 180/220, others advocating for a smooth enough finish for primer to adhere to. I think I'm going to have to go with my gut and see how this works:
Sand with 80? → 120 → 150? → 220 grit prior to assembly (any grit with ? will be subject to necessity)
Pre-prime what I can (or choose to), tape off sections that will be glued and screwed
Assemble with glue and screws
Plug/fill holes and spot sand to 220
Finish (spot) priming
Put on the finish paint (2x)
The results will speak for itself once it's in the projects gallery. Hope it will be soon since the stool is a birthday present to be delivered in mid-April.
The primer I will be using is Zinsser 123, and I will be using General Finishes Milk Paint
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
LumberJocks Woodworking Forum
2.5M posts
96K members
Since 2006
A forum community dedicated to professional woodworkers and enthusiasts. Come join the discussion about shop safety, wood, carpentry, lumber, finishing, tools, machinery, woodworking related topics, styles, scales, reviews, accessories, classifieds, and more!